04-08-2021 10:52 AM
I am running CMS 2.9.2 clustered.
Problem
1. All Desktop and Conference Room systems connect to cb1
2. Chrome - CMA calls most of the time will connect to cb3
They are all dialing into the same CONF ID.
Problem is A/V doesn't pass between cb1 or cb3 and vice versa
I will disconnect the CMA and than dial back in and it will connect to cb1 ?
Any Idease why the A/V doesn't pass between clustered servers on the same CONF ID?
Any Ideas how to force calls using web to go to cb1 first and then next participant roles to cb2 when cb1 is at capacity ?
Thanks.
Solved! Go to Solution.
04-14-2021 07:46 PM
Make sure u have Outbound rules right. if u have 6 callbridges in cluster ull need 6 OB rules
----------------------
However, when configuring the dial plan to route calls between Call Bridges
(when ‘Peer link SIP domain’ field is left empty), you need to use the Call Bridge’s IP address in
both ‘domain’ and ‘sip proxy address’ fields of the outbound dial plan
---------------------------
//V.
04-09-2021 05:23 AM - edited 04-09-2021 05:38 AM
Maybe this will help you
If you have a cluster, all connections must be through one URL, is that so with you?
04-09-2021 07:25 AM
Yes we are using one URL to connect but most connect to cb3 and sometimes cb1.
No A/V pass between the cb3 and cb1 ?
04-09-2021 07:47 AM
Does anyone have an example config for load balancing six cb's make cb1, Priority 1 following cb2, cb3, cb4 etc. ??
Thank you.
04-09-2021 10:31 AM
May be it ?
04-14-2021 07:46 PM
Make sure u have Outbound rules right. if u have 6 callbridges in cluster ull need 6 OB rules
----------------------
However, when configuring the dial plan to route calls between Call Bridges
(when ‘Peer link SIP domain’ field is left empty), you need to use the Call Bridge’s IP address in
both ‘domain’ and ‘sip proxy address’ fields of the outbound dial plan
---------------------------
//V.
04-21-2021 11:23 AM
Thank you that worked.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide