06-11-2014 02:32 AM - edited 03-18-2019 03:04 AM
Is there any way to manually create an address book and upload it to an EX unit? I have a client that does not deploy TMS but wants to deploy phone books, this is how I have advised Address books are managed. I was trying to extract the file and edit myself but now with TC7 we have lost WinSCP this is a challenge.
Solved! Go to Solution.
06-18-2014 09:03 PM
You can do it via the CLI with the xcommand phonebook contact add API command - or through the web interface.
WinSCP is still available to connect to the endpoint, but you need to use the "remotesupport" account under TC7.x.
Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
Please remember to mark helpful responses and to set your question as answered if appropriate.
06-18-2014 09:03 PM
You can do it via the CLI with the xcommand phonebook contact add API command - or through the web interface.
WinSCP is still available to connect to the endpoint, but you need to use the "remotesupport" account under TC7.x.
Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
Please remember to mark helpful responses and to set your question as answered if appropriate.
06-19-2014 12:05 AM
Thanks Wayne.
I created a phone book in notepad for the multiple entries required and pasted the whole file into the API window. Worked wonders!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide