Gatekeeper Accounting: Logging the IP addresses

[h-aliasgari]

Hi,

I am using a Cisco 7200 as a gatekeeper and I have setup a RADIUS server to log the calls. The problem is that the gatekeeper is not logging the IP ADDRESSes of the gateways (even for gateways registered to its local zone). It just logs the H323-ID of the gateways belonging to the local zone. Although you can see the IP address of the gateways in the "show gatekeeper calls" command ouput.

Is there anyway I could configure the gatekeeper to log the IP address of the gateways. Is this done through the GK API? If yes, could anyone explain or give me an example?

Thanks,

Hamid

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.