02-18-2009 10:20 PM - edited 03-17-2019 09:38 PM
Hi
We have a CUCM and Cisco unified video conferencing setup seperately.
We have 7985 Phones registered with CUCM. Pl clarify me how to integrate this Video Phone with the setup of CUVC and take this phone in video conferencing.
CUCM version 7.0
CUVC 3545.
Regards
Karthik
02-22-2009 10:21 PM
Hi Bevilacqua
Can you provide some knowledge sharing on requirement.
Regards
Karthik
02-18-2010 03:02 PM
You need to register both the CUVC and CUCM to a gatekeeper (plenty of documentation around on how to configure a gatekeeper - it's pretty easy).
On the CUVC, enable the H323 protocol and enter the IP address of the gatekeeper.
On CUCM, add a new device -> gatekeeper and enter the details.
Then create a new H.225 trunk to the gatekeeper you just added. All the trunk details are pretty straight forward.
Create an appropriate route pattern in CUCM to match the service prefix's configured in CUVC and send it out the gatekeeper trunk.
Note that this isn't a step-by-step configuration guide, just the basic layout of what you need to do.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide