05-22-2014 01:12 AM - edited 03-18-2019 03:01 AM
hello all,
is there any shutdown procedure for cts codec.
Because approximetly after each restart one of the codec is broken down.
thanks.
Solved! Go to Solution.
05-22-2014 05:26 PM
It'd depend on what CTS you have.
Here's a guide for some of the 3000 Series: http://www-tss.cisco.com/eservice/compass/Telepresence/tasks/ShutDown_CTS_System.html
Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
Please remember to mark helpful responses and to set your question as answered if appropriate.
05-22-2014 05:26 PM
It'd depend on what CTS you have.
Here's a guide for some of the 3000 Series: http://www-tss.cisco.com/eservice/compass/Telepresence/tasks/ShutDown_CTS_System.html
Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
Please remember to mark helpful responses and to set your question as answered if appropriate.
05-22-2014 10:15 PM
thank you Wayne.
12-21-2014 10:08 PM
hi Wayne again
is there any guide to restart 1100?
just cut off the whole power is enough?
thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide