Issue Web password EX60 / C20

[Anthony.Luna.Produban]

Recently we registered 2 C20 and 2 EX60 in our upgraded CUCM 8.6.2, we have configured these endpoints with native integration and works fine, but today, we saw that the web access password provided by CUCM is not worked, in fact, have not password, just user admin.

There are some way to provide the web access password from CUCM? I know we can change the pass in web, but the next month we will register 50 endpoints (ex60, ex90,c20) and we want, if is possible, do it from CUCM.

EX60 - TC5.0.1

C20 - 5.1.4

CUCM - 8.6.2.22900-9

Regards

[Marius Nedregaard]

Hi Anthony.

This is not possible from CUCM, but you have other options like disabling the HTTP and/or the SSH interface from CUCM.

As per now, I know that you can use TMS to change passwords. I am not sure if this is supported by the CTS-MAN.

How to configure web access and passwords can be found in this guide

http://www.cisco.com/en/US/docs/telepresence/endpoint/codec-c-series/tc5/administration_guide/cts_endpoint_administration_ucm86_quick_start_guide_tc50.pdf

Thanks

//Marius

[Anthony.Luna.Produban]

We have a TMS but for now we are working with CTS Manager and we removed these endpoints on TMS because we had some troubles with the phone book provisioning.

I think we will disable the web/ssh access until we have the TMS exchange.

Thanks for your help Marius.