Hi,
i need some advise from you guys.
Situation:
- Telepresence Endpoints (CTS,MC,EX) registered on CUCM 8.6
- MCU 53xx connected via H.323 (with prefix) and SIP to VCS-C
- MCU added to TMS 14.1.1 and i can see the prefixes like the following:
E.164 Alias:
8161180
8161181
8161182
8161183,
81 is the prefix configured on the MCU H323 setting.
SIP URI:
61180@<ip_vcs-control>
61181@<ip_vcs-control>
61182@<ip_vcs-control>
61183@<ip_vcs-control>
61184@<ip_vcs-control>
In my understanding if i schedule a meeting and if its not point-to-point (like configured in TMS) it should use a MCU ressource. Normaly it should create an automatic conference on MCU, right? Or do i have to configure pre-configured conferences on the MCU ?!
Because at the moment if i configure a meeting on TMS and the meeting starts the conference could not be created at starting time cause no conference configured on the MCU but in the scheduled meeting it says MCU is the routing path.
Could someone give me the steps i need to configure on MCU, VCS-C and TMS to make this work?
Cheers
T
