06-29-2014 11:45 PM - last edited on 03-25-2019 09:12 PM by ciscomoderator
I have a sx10 (TC7.1.1 or TC7.1.3 or TC7.1.4 it is the same problem with each SW Release) codec and want to use 802.1x for network authentication but this isn´t working.
I configured the user name for the authentication in the Identity field of the sx10 codec. But the sx10 isn´t sending this value.
The codec uses it´s own mac adress for authentication and not the value of the Identity field.
When i use the same configuration with an sx20 (TC7.1.1) codec everything is working fine.
Is there a problem with the sx10 and 802.1x?
Best regards
Manuel
08-28-2014 01:33 PM
Hi Manuel,
we have the same issue.
There is a new Software available, 7.2
http://software.cisco.com/download/release.html?mdfid=286242547&flowid=50108&softwareid=280886992&release=TC7.1.4&relind=AVAILABLE&rellifecycle=&reltype=latest
I think, there is a problem with the sx10 and 802.1X. We use the same settings as in Cisco TelePresence Profile 52/55 Dual but the sx10 doesn´t respond to the eap packets of the switch.
08-29-2014 12:37 AM
Hi Marco,
i got TC7.2 BETA from TAC, with this software 802.1x is working.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: