07-12-2018 12:30 PM - edited 03-18-2019 02:14 PM
I am having no problem updating things like community name using
http://endpointip/putxml
and this in the body
<Configuration><NetworkServices><SNMP><CommunityName>ABCD</CommunityName></SNMP></NetworkServices></Configuration>
However this is not working. I am receiving a 400. So I am guessing I have the format incorrect.
<Configuration><NetworkServices><SNMP><Host[@item='1']><Address>10.6.15.100</Address></Host[@item='1']></SNMP></NetworkServices></Configuration>
Thanks
Solved! Go to Solution.
07-12-2018 06:01 PM
At a quick glance, your "host" section is incorrectly formatted.
Try:
<Configuration><NetworkServices><SNMP><Host item="1"><Address>10.6.15.100</Address></Host></SNMP></NetworkServices></Configuration>
Please remember to mark helpful responses and to set your question as answered if appropriate.
07-12-2018 06:01 PM
At a quick glance, your "host" section is incorrectly formatted.
Try:
<Configuration><NetworkServices><SNMP><Host item="1"><Address>10.6.15.100</Address></Host></SNMP></NetworkServices></Configuration>
Please remember to mark helpful responses and to set your question as answered if appropriate.
07-13-2018 06:13 AM
Thank you. Very helpful. That works.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide