10-23-2003 06:06 AM - edited 03-17-2019 08:06 PM
How to config guarante bandwidth of Video Conference C2950G & C3600.(Polycom Device)
Tks!
11-03-2003 08:11 AM
I recommend Low Latency Queueing for prioritizing video traffic. You can reference your extended access lists to the source and/or destination ip addresses of the video conferencing systems.
Here are a few CCO links..
Low Latency Queueing:
http://www.cisco.com/warp/public/121/latencyqueueing.html
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t7/pqcbwfq.htm
Low Latency Queueing for the VIP:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s9/sllqvip.htm
11-11-2003 06:33 AM
This is a complex question that requires more than BB post to answer. I suggest looking at the following link that explains QoS Strategy and configs for video in depth. http://www.cisco.com/en/US/tech/tk543/tk544/technologies_tech_note09186a0080094968.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
