はじめに
IOS XR7 Release 7.5.x. 以降のバージョンから 、
Factory-Reset 機能が新しく実装されましたので、紹介します。
概要
Factory-Reset コマンド実行すると、装置上に保存されているお客様データ、設定、ログファイルがすべて
クリアされ初期状態に戻りますので、初期化時のみご利用ください。
実行方法
下記はコマンド実行例となります。
Cisco8000シリーズ
RP/0/RP0/CPU0:Router#factory-reset ?
reload Reload the location after performing factory-reset
shutdown Shutdown the location after performing factory-reset
RP/0/RP0/CPU0:Router#factory-reset reload ?
location Specify location
RP/0/RP0/CPU0:Router#factory-reset reload location ?
0/RP0/CPU0 Fully qualified location specification
WORD Fully qualified location specification
all Show all locations
RP/0/RP0/CPU0:Router#factory-reset reload location all
Performing factory-reset may affect the stability of the system. Re-imaging maybe required to recover. Continue?
[confirm]
RP/0/RP0/CPU0:Router# Status report: node0_RP0_CPU0: START TO BACKUP
Preparing system for backup. This may take a few minutes especially for large configurations.
RP/0/RP0/CPU0:Router#
RP/0/RP0/CPU0:Router# Status report: node0_RP0_CPU0: BACKUP HAS COMPLETED SUCCESSFULLY
[Done]