BGP の update-delay 値は "show bgp process" コマンドにて確認が可能ですが、"bgp update-delay 0" を設定したときのみ "show bgp process" 上から "Update delay" の項目自体が表示されなくなります。 #bgp update-delay 1 を設定した場合 ------------------------- RP/0/RSP0/CPU0:ASR9000(config-bgp)#bgp update-delay 1 RP/0/RSP0/CPU0:ASR9000(config-bgp)#commit RP/0/RSP0/CPU0:ASR9000(config-bgp)#do sh bgp process Thu Mar 6 01:13:39.946 UTC BGP Process Information: BGP is operating in STANDALONE mode Autonomous System number format: ASPLAIN Autonomous System: 65000 Router ID: x.x.x.x (manually configured) Default Cluster ID: x.x.x.x Active Cluster IDs: x.x.x.x Fast external fallover enabled Neighbor logging is enabled Enforce first AS enabled Default local preference: 100 Default keepalive: 60 Graceful restart enabled Restart time: 120 Stale path timeout time: 360 RIB purge timeout time: 600 Update delay: 1<<<<<<<<<<<<< Generic scan interval: 60 ------------------------- #bgp update-delay 0 を設定した場合 ------------------------- RP/0/RSP0/CPU0:ASR9000(config-bgp)#bgp update-delay 0 RP/0/RSP0/CPU0:ASR9000(config-bgp)#commit Thu Mar 6 01:13:11.531 UTC RP/0/RSP0/CPU0:ASR9000(config-bgp)#do sh bgp process Thu Mar 6 01:13:14.985 UTC BGP Process Information: BGP is operating in STANDALONE mode Autonomous System number format: ASPLAIN Autonomous System: 65000 Router ID: x.x.x.x (manually configured) Default Cluster ID: x.x.x.x Active Cluster IDs: x.x.x.x Fast external fallover enabled Neighbor logging is enabled Enforce first AS enabled Default local preference: 100 Default keepalive: 60 Graceful restart enabled Restart time: 120 Stale path timeout time: 360 RIB purge timeout time: 600 Generic scan interval: 60 ------------------------- |