【Overview】
Cisco3900 シリーズの詳細は下記ページに記載されています。
http://www.cisco.com/web/JP/product/hs/routers/c3900isr/index.html
http://www.cisco.com/web/JP/product/hs/routers/c3900isr/prodlit/white_paper_c11_556985.html
【型番】
ライセンスの型番は以下のものがあります。
ISRG2_MFGINSTALL
ISRG2_REHOST
L-FL-SSLVPN25-K9
FL-39-LI
FL-39-LI=
FL-39-LI-K9
FL-39-LI-K9=
L-FL-39-LI
L-FL-39-LI=
L-FL-39-LI-K9=
SL-39-DATA-K9=
SL-39-UC-K9=
SL-39-SECNPE-K9
L-SL-39-SEC-K9=
FL-GK-3925=
L-SL-39-DATA-K9
L-FL-39-HSEC-K9
FL-C3900-WAASX=
FL-SSLVPN100-K9=
SL-39-IPB-K9=
L-VL-X-39-SECNP-K9
FL-GK-3925
L-FL-39E-HSEC-K9=
L-FL-39-HSEC-K9=
L-FL-C3900-WAASX
FL-GK-3945=
SL-39-IPB-K9
L-VL-X-39-SEC-K9
L-SLFL-39=
L-FL-39-SNA=
L-SL-39-SEC-K9
L-FL-39E-HSEC-K9
L-FL-GK-3925=
L-FL-GK-3945=
FL-39-SNA=
FL-39-SNA
L-SL-39-SECNPE-K9
L-SL-39-UC-K9=
L-FL-C3900-WAASX=
SL-39-SEC-K9=
L-SL-39-DATA-K9=
VL-X-39-UC-K9
FL-39E-HSEC-K9
SL-39-SEC-K9
SL-39-SECNPE-K9=
SL-39-UC-K9
VPAK-3900=
L-VL-X-39-DATA-K9
L-SL-39-SECNPE-K9=
L-SL-39-UC-K9
FL-39-HSEC-K9
SL-39-DATA-K9
VL-X-39-SEC-K9
VL-X-39-SECNPE-K9
FL-GK-3945
L-FL-GK-2901
L-FL-39-SNA
L-FL-GK-3945
FL-39E-HSEC-K9=
FL-39-HSEC-K9=
L-VL-X-39-UC-K9
VL-X-39-DATA-K9
L-FL-GK-3925
SLFL-39=
FL-C3900-WAASX
L-VPAK-3900=
L-FL-SSLVPN25-K9=
FL-SSLVPN25-K9=
FL-SSLVPN10-K9=
FL-SSLVPN100-K9
L-FL-SSLVPN100-K9=
SL-LWAPP
L-FL-SSLVPN100-K9
L-FL-SSLVPN10-K9=
FL-SSLVPN10-K9
FL-SSLVPN25-K9
--------------------------------------------------------------------------------------------
【製品新規購入時】
- ライセンス状態
出荷される各デバイスには、IP Base ソフトウェア アクティベーション キーがデフォルトでインストールされています。
発注時の追加キーは、お客様の発注に応じてプリインストールされて出荷されます。
その他、購入後の追加ライセンスやアップグレードライセンスはPAKでの提供となります。
http://www.cisco.com/web/JP/product/hs/routers/c3900isr/prodlit/white_paper_c11_556985.html
- ライセンス取得手順
*PAKにて提供されたライセンスの場合には 入手した
PAK コードと UDI を Cisco のオンライン ライセンス ポータル(http://www.cisco.com/go/license)に登録します。
必要情報:
PAK:
Product ID: *1
Serial#:*1
*1確認コマンド"show license udi"
http://www.cisco.com/web/JP/product/hs/routers/c3900isr/prodlit/white_paper_c11_556985.html#wp7
--------------------------------------------------------------------------------------------
【RMA時】
- ライセンス状態
RMAされた機器には、IP Base ライセンス以外は含みません。
- ライセンス取得手順
追加で購入したライセンス(Advanced IP Services など)を転送(リホスト)する場合は、
RMA ポータル(https://tools.cisco.com/SWIFT/Licensing/LicenseAdminServlet/getProducts)が用意されています。
必要情報:
故障機と代替機の下記情報
Product ID: *1
Serial#:*1
*1確認コマンド"show license udi"
上記RMAポータルにて転送(リホスト)ができない場合には故障品/代替品のS/N、
代替品UDIを元に変更(リホスト)依頼をJapan TACまで申請してください。
- ライセンス投入手順
LICENSE INSTALLATION INSTRUCTIONS FOR TECHNOLOGY PACKAGES AND FEATURES:
License Installation Using the CLI
First copy this license to the router's flash memory using the copy command and a TFTP server.
Example:
Router#copy tftp flash:
Address or name of remote host [ ]? 10.0.0.1
Source filename [ ]? uck9_license.lic
Destination filename [uck9_license.lic]?
Accessing tftp://172.20.244.138/uck9_license.lic...
Loading uck9_license.lic from 172.20.244.138 (via GigabitEthernet1/0/1): !
[OK - 1161 bytes]
1161 bytes copied in 0.059 secs (19678 bytes/sec)
Note: while the show flash: command now lists the file in the flash, it has not yet been installed. The license install command must be used to install the license.
Example:
Router#license install flash:uck9_license.lic
Installing licenses from "flash:uck9_license.lic"
Installing...Feature:uck9...Successful:Supported
1/1 licenses were successfully installed
0/1 licenses were existing licenses
0/1 licenses were failed to install
At this point of time, the license is installed in the system. But, it is not enabled.
To enable the technology package license(datak9, uck9, securityk9 or securityk9_npe), please reload the system if the technology package is not yet enabled.
To disable any technology package license, please issue the following configuration command, save configuration and reload the system.
Router(config)#license boot module <module_name> technology-package <package_name> disable