【Overview】
800シリーズの詳細は下記ページに記載されています。
http://www.cisco.com/web/JP/product/hs/routers/c800isr/index.html
http://www.cisco.com/web/JP/product/hs/routers/isr/isr800/prodlit/sftactlic_qa.html#q6
【型番】
ライセンスの型番は以下のものがあります。
FL-C810-WAASX
FL-C880-WAASX
FL-C880-WAASX=
FL-C890-WAASX
FL-C890-WAASX=
L-880-AIS=
L-FL-C880-WAASX
L-FL-C880-WAASX=
L-FL-C890-WAASX
L-FL-C890-WAASX=
L-IAD880-AIS=
L-SL-800-SEC-K9
L-SLFL-800=
SL-800-SEC-K9
SL-810-ADVSEC
SL-810-ADVSEC-NPE
SL-810-AIS
SL-810-AIS-NPE
SL-860-ADVSEC
SL-880-ADVSEC
SL-880-ADVSEC-NPE
SL-880-ADVSEC-NPE=
SL-880-AIS
SL-880-AIS=
SL-880-AIS-NPE
SL-880-AIS-NPE=
SL-890-AIS
SL-890-AIS-NPE
SL-890-AIS-NPE=
SLFL-800=
SL-IAD880-ADVSEC
SL-IAD880-AIS
SL-IAD880-AIS=
SL-SRST880-AIS
--------------------------------------------------------------------------------------------
【製品新規購入時】
- ライセンス状態
製造時の発注すべてについて、ライセンスがプリインストールされます。たとえば次のような例があります。発注時に Advanced IP Services イメージを含む Cisco 880 プラットフォームを購入した場合は、Advanced IP Services ライセンスがプリインストールされているので、追加ライセンスをインストールする必要はありません。
新しい Cisco 800 シリーズ サービス統合型ルータ(ISR)のみに関して:Cisco 860 および 880 ISR では、ソフトウェア アクティベーションの導入によって、Advanced Security および Advanced IP Services フィーチャ セット イメージの永久ライセンスおよび一時ライセンスのアクティベーションが有効になります(表 1 を参照)。
表 1 プラットフォームごとのデフォルトのイメージ/ライセンス
Cisco 860 Cisco 880
Advanced Security ○ ○
Advanced IP Services - ○
* Advanced Security:Cisco 860 および 880 プラットフォーム用のデフォルトのフィーチャ セットです。したがって、(工場出荷時にプリインストールされる)デフォルトのライセンスです。
* Advanced IP Services:Cisco 880 プラットフォーム用のアップグレード オプションです。
製造時の Advanced IP Services へのアップグレードを購入した場合は、Advanced Security および Advanced IP Services の両方のライセンスがプリインストールされるので、購入後の追加作業は必要ありません。
購入後に Advanced IP Services へアップグレードする場合は、Advanced IP Services フィーチャ セットをアクティベートする前に、ライセンスを購入してインストールする必要があります。
http://www.cisco.com/web/JP/product/hs/routers/isr/isr800/prodlit/sftactlic_qa.html#q6
- ライセンス取得手順
*追加の Advanced IP Services 等へアップグレードの場合には 入手した
PAK コードと UDI を Cisco のオンライン ライセンス ポータル(http://www.cisco.com/go/license)に登録します。
必要情報:
PAK:
Product ID: *1
Serial#:*1
*1確認コマンド"show license udi"
--------------------------------------------------------------------------------------------
【RMA時】
- ライセンス状態
デフォルトのライセンスとなるAdvanced Security で納品されます。
http://www.cisco.com/web/JP/product/hs/routers/isr/isr800/prodlit/sftactlic_qa.html#q12
- ライセンス取得手順
追加で購入したライセンス(Advanced IP Services など)を転送(リホスト)する場合は、
RMA ポータル(https://tools.cisco.com/SWIFT/Licensing/LicenseAdminServlet/getProducts)が用意されています。
必要情報:
故障機と代替機の下記情報
Product ID: *1
Serial#:*1
*1確認コマンド"show license udi"
上記RMAポータルにて転送(リホスト)ができない場合には故障品/代替品のS/N、代替品UDI, "Show Version"を添えて変更(リホスト)依頼をJapan TACまで申請してください。
代替機のPIDが不明な場合はシリアルのみの提示で構いません。
- ライセンス投入手順
LICENSE KEY INSTALLATION INSTRUCTIONS
Attached to this email you will find a file with the ".lic" extension. This is the file that will activate the IOS Feature Set that you purchased for your router. Do not edit the contents of the .lic file in any way or you will render the file useless.
Installing your Cisco IOS Software Activation License
This license can be installed using the IOS command line interface (CLI) or the Cisco License Manager. Instructions for using the CLI are included below. For details on downloading or using the Cisco License Manager, please go to http://www.cisco.com/go/clm.
Please note the Unique Device Identifier (UDI) for this license. This license can only be installed on the router that has this matching UDI.
License Installation Using the CLI
First copy this license to the router's flash memory using the copy command and a TFTP server.
Example:
881GW-demo#copy tftp flash
Address or name of remote host [192.168.1.3]?
Source filename []? 881GW-adv-IP.lic
Destination filename [881GW-adv-IP.lic]?
Accessing tftp://192.168.1.3/881GW-adv-IP.lic...
Loading 881GW-adv-IP.lic from 192.168.1.3 (via Vlan1): !
[OK - 1193 bytes]
1193 bytes copied in 0.424 secs (2814 bytes/sec)
881GW-demo#
881GW-demo#license install flash:881
881GW-demo#license install flash:881GW-adv-IP.lic
Installing licenses from "flash:881GW-adv-IP.lic"
Installing...Feature:advipservices...Successful:Supported
1/1 licenses were successfully installed
0/1 licenses were existing licenses
0/1 licenses were failed to install
881GW-demo#
*Jun 5 04:43:12.247: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module nam
e = c880-data Next reboot level = advipservices and License = advipservices
*Jun 5 04:43:12.355: %LICENSE-6-INSTALL: Feature advipservices 1.0 was installe
d in this device. UDI=CISCO881GW-GN-A-K9:FHK115224EP; StoreIndex=0:Primary License Storage
881GW-demo#
******** To enable the Adv. IP feature license, reload the platform *********
881GW-demo#reload
Do you want to reload the internal AP ? [yes/no]: yes
Do you want to save the configuration of the AP? [yes/no]: yes
Proceed with reload? [confirm]