Hi
unable to view packet loss stats in Cisco trex stl
port | 0 | 1 | total
----------------------------------------------------------------------
owner | root | root |
link | UP | UP |
state | TRANSMITTING | TRANSMITTING |
speed | 10 Gb/s | 10 Gb/s |
CPU util. | 2.09% | 2.09% |
-- | | |
Tx bps L2 | 4.91 Gbps | 4.91 Gbps | 9.82 Gbps
Tx bps L1 | 4.97 Gbps | 4.97 Gbps | 9.95 Gbps
Tx pps | 409.07 Kpps | 409.06 Kpps | 818.14 Kpps
Line Util. | 49.74 % | 49.74 % |
--- | | |
Rx bps | 4.91 Gbps | 4.91 Gbps | 9.82 Gbps
Rx pps | 409.00 Kpps | 409.00 Kpps | 818.00 Kpps
---- | | |
opackets | 3888049 | 3888003 | 7776052
ipackets | 3885664 | 3885650 | 7771314
obytes | 5832073500 | 5832004500 | 11664078000
ibytes | 5828494919 | 5828473919 | 11656968838
opackets | 3.89 Mpkts | 3.89 Mpkts | 7.78 Mpkts
ipackets | 3.89 Mpkts | 3.89 Mpkts | 7.77 Mpkts
obytes | 5.83 GB | 5.83 GB | 11.66 GB
ibytes | 5.83 GB | 5.83 GB | 11.66 GB
----- | | |
oerrors | 0 | 0 | 0
ierrors | 0 | 0 | 0
Please let us know what needs to be done get packet loss stats on cisco Trex
