create vlan in UCS and add to vlan group ( uplink)
need some guidance , want to create vlan in UCS and add this to a uplink via a vlan group , but how should that workflow look lite exactly tried but he can´t add the vlan to the vlan group, i can choose vlan and then do it but i want to create a vlan and then put it on the vlan group in the same workflow, and how does the Multivlan conversion comes into play here or not
Thanks , that was perfect I changed the convert part to the one in the new version 6.5 ( that we are running now) same as in your flow and it worked fine , I don't know exactly where the first conversion flow I used came from and failed
something in there was not working with the UCS.
I am still puzzled, but if I understand this right we need the complete DN from UCS to make this add to vlan group to work , but i haven't seen any info about why exactly, because add a vlan is one thing and another to use it in the same workflow and attach it to the vlan group, what I know of is the only way to get the vlan on a uplink via UCS D.
In this article, we are providing sample work flows for the private cloud management solution. In our topology, ACI is used for network. We have placed the BMA outside the UCS fabric and connected through L3 switch. The UCS ser...
This workflow will log onto a WLC and find the connected AP(s) and test if they are on the network.
Validated on UCSD 126.96.36.199
This came together via several parties of people (Sasha, Russ and Michael Z.)
The original question was this:
When deploying open automation connector module and trying to create side menu per UCSD docs
This contribution was provided by: Sabina Al Farah.
Many thanks go out to Sabina Al Farah.
2 Workflows are attached :
Ceph - Setup Cluster - using Ansible - on RHEL
Ceph - Provision Block Storage
This is an integration example between UCSD and Cohesity.
Posted for Russ (Please direct questions to: email@example.com)
Please watch video for more details: