FlexPod Secure Service Container with NetApp Application Storage

[rsivapra]

Workflow Name:	FlexPod Secure Service Container with NetApp Application StorageWORKFLOW v1.0
Description:	This workflow follows the Tenant   Onboarding with Secure Datastore (using VMware Distributed Virtual Switch)   process documented in NetApp TR-4298  (Managing NetApp FlexPod with Cisco UCS   Director).  This technical report is   publicly available at:  http://www.netapp.com/us/system/pdf-reader.aspx?m=tr-4298.pdf
Compatible UCS Director Versions:	UCSD 4.1.x.x
Category:	Virtualization, Network, Storage, Compute
Components:	NetApp Clustered Data ONTAP Cisco UCS System Cisco Nexus 5Ks VMware ESXi
Workflow Tasks Included: (shown in order as they appear in workflow)	CUSTOM:  Get Service   Container Data CUSTOM:  Get Tenant IP   Schema Generate VLAN from Pool Create DVPortGroup Add VM NICs Add VLAN Assign VLAN to CUIC Group Create VLAN (on first Nexus switch) Update Trunk (on first Nexus switch) Create VLAN (on second Nexus switch) Update Trunk (on second Nexus switch) Create Cluster VLAN Interface (on first cDOT node) Create Cluster VLAN Interface (on second cDOT node) Create Cluster Export Policy Create Cluster Export Rule Create Cluster Flexible Volume Mount Cluster Volume
User Inputs:	Tenant Name Service Container Tenant SVM (vServer) Storage Name Size Units Storage Cluster Node placement Storage Cluster Aggregate placement
Prerequisites:	This workflow is co-dependent with workflow “FlexPod Tenant   Onboarding with Secure Datastore” All required component/devices must be added to UCS Director The vSphere cluster to be used must have a DV switch available Create a VLAN pool policy for tenant VLANs CUSTOM TASK:  Get Service   Container Data CUSTOM TASK:  Tenant IP schema
Limitations:	To simplify required inputs, this example workflow uses an   auto-generated IP schema which limits the number of tenants to 255 and   Service Containers to 255 per tenant.   To extend beyond this limit, the workflow should be modified to   integrate with an IP management system.

Instructions for Use:

1. Download the attached .ZIP file below to your computer.
   *Remember the location of the saved file on your computer.
2. Unzip the file on your computer. Should end up with a .WFD file.
3. Log in to UCS Director as a user that has
   "system-admin" privileges.
4. Navigate to "Policies-->Orchestration" and click on
   "Import".
5. Click "Browse" and navigate to the location on your
   computer where the .WFD file resides. Choose the .WFD file and click "Open".
6. Click "Upload" and then "OK" once the file
   upload is completed. Then click "Next".
7. Click the "Select" button next to "Import
   Workflows". Click the "Check All" button to check all checkboxes
   and then the "Select" button.
8. Click "Submit".
9. A new folder should appear in
   "Policies-->Orchestration" that contains the imported workflow.
   You will now need to update the included tasks with information about the
   specific environment.