CME 10.5 CME SIP Phone GUI access

[Vishal Parekh]

Dear All,

I am running CME 10.5 and I have 8811 & 8831 SIP phones.

Phones are registered but I have couple of issue with these Phones.

1) Can I have GUI access of SIP phones ?  Like for SCCP phones we can access through GUI.

If there is any document which says it's possible then please share the same.

I am specifically looking for SIP phones. GUI for my SCCP phones are working perfectly fine.

Below is my config for voice register global

voice register global
 mode cme
 source-address 10.105.61.2 port 5060
 timeouts interdigit 6
 max-dn 100
 max-pool 100
 authenticate register
 timezone 35
 time-format 24
 date-format D/M/Y
 voicemail 299
 tftp-path flash:
 file text
 create profile sync 0201584232787866
 ntp-server 10.114.80.17 mode directedbroadcast
 conference hardware
 camera
 video
!

Regards,

Vishal

[Jonathan Unger]

I have used this process for 9971 SIP phones on CME and it works fine.

https://supportforums.cisco.com/discussion/12342791/enable-web-access-9971-connected-cme

Can you give it a go and see if it works for your 88XX phones?

[Vishal Parekh]

Hello Jonathan, 

I am looking for GUI platform for SIP phones which allow me to do changes of speed dials, forward all, etc, features. 

Please let me know if you have any idea on the same. 

Thanks, 

Vishal

[Jonathan Unger]

Hi Vishal,

There is no ability for the CME GUI to configure SIP phones that I am aware of.