09-20-2010 02:44 PM - edited 03-19-2019 01:37 AM
Dear all
We used CME 7.1 with c2800nm-spservicesk9-mz.124-24.T1.bin on 2851 box , connected via a E1 to PSTN.
We have a major problem with the extension when it is not logged, when an external call is made to this extension the signaling sent by CME is recognized as "the number dialed does not exist". Please your guideline is required.
Best regards
Gvo.
09-21-2010 07:51 AM
Can you provide the current running configuration of the CME router?
-Felipe
09-21-2010 08:27 AM
09-21-2010 11:08 AM
Can you collect the following debugs for a call which demonstrates the problem.
debug vpm signal
debug isdn q931
debug voip ccapi inout
Please note the calling and called party numbers.
-Felipe
09-24-2010 02:13 PM
09-27-2010 06:43 AM
What extension were you calling? What was the calling party number?
-Felipe
09-27-2010 07:12 AM
Hi Felipe
debug 01 extension A:
Time: 14:44
Source: 24139033
Destination: 8284451
Time: 14:47
Source: 81080971
Destination: 8284451
debug 02 extension B:
Time: 14:52
Source: 24139033
Destination: 8284453
Time: 14:53
Source: 81080971
Destination: 8284453
Thanks for helpme
09-27-2010 07:33 AM
Do you want the calls to go to voicemail or do you just want the message played to the calling party to be different?
-Felipe
09-27-2010 10:21 AM
Hi Felipe
I need the phone just to ring or the call to be re-directed to pilot..
Salu2 y gracias
Gvo
09-29-2010 10:10 AM
Hi Gustavo
You have a nice solution.
I am implementing it but users complies that ist not god to have two number when they are calling internaly , I means when they are loged at the distination apear one number ( user - profile ) , and when they are not loged apears other number ( logout profile ) .
You have this situation too ?
Concerning you question , I am using call forward to an pilot hunt group sucess
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide