Configuring Dial-Plan in CME

[Vysakh Sundar]

Have to configure the dial-plan in CME version 10

Is ther any kind of timer setting as in Call Manager to wait for all the
digits and to route the call properly

If user dial 0 to reception

if user dial 024 to internal extension

if user dial 02433 to other site going through the voip-dialpeer 

Can We do this please help

[Lisandro Quinteros]

For sccp phones under Telephony Service for sip phone I guess under voice register global

This is the max time to wait for another digit 

timeouts interdigit (telephony-service)

To set the interdigit timeout value for all Cisco IP phones in a Cisco Unified CME system, use the timeouts interdigit command in telephony-service configuration mode. To return to the default value, use the no form of this command.

timeouts interdigit seconds

no timeouts interdigit

Hope it helps

[Lisandro Quinteros]

I forgot  to say default is 10 sec. .minimum I Think is 3..