Prime collaboration provisioning 12.1 standard edition.
I am getting an error adding a service area using the AddServiceArea.txt .to a Prime Provisioning deployment.
The AddServiceArea.txt file looks as follows.
| #AddServiceAreaTxt |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| >>OrderType |
UserID |
ProductName |
ServiceArea |
Domain |
Subscriber Type |
Call Processor Device Name |
Unified Presence Processor Device Name |
Common Device Config |
Location |
Partition |
Device Pool |
Unified Message Processor Device Name |
Subscriber Template |
Exchange Server |
Directory Number Blocks |
Voice Gateway References |
| addServiceArea |
icadmin |
|
WEBN |
CUCM11 Lab |
|
cucm-CiscoUnifiedCM |
imp-CiscoUnifiedPresence |
SKTN-LOC |
SKTN-DN-PT |
SKTN_DP |
ucn-CiscoUnityConnection |
voicemailusertemplate |
|
|
|
When i try to run the batch action i get the following error;
Encountered the following error(s):
The device cucm-CiscoUnifiedCM does not exist.
The device imp-CiscoUnifiedPresence does not exist.
Analog Voice Gateway References to servicearea association failed - No Call Processor details found.
The device ucn-CiscoUnityConnection does not exist.
However I can manually add the service area using the GUI using the following;
call processor cucm-CiscoUnifiedCM,
presence processor imp-CiscoUnifiedPresence
Unified message processor ucn-CiscoUnityConnection
The names of the 3 processors are the same in both cases but the Batch action file will not work.
I will attach my batch action, and a screenshot of my manual configuration through the web gui of the service area.
How would i correct this error??
