01-13-2011 10:55 AM - edited 03-19-2019 02:12 AM
Can someone please give me any suggestions on configuring a dialable lead number for a line group? I'd like to be able to setup a DN to forward all to a line group. Any help would be greatly appreciated. CUCM 7.1.3
01-13-2011 11:06 AM
There are no special considerations, a hunt pilot can be any DN, a DID, etc.
And you can set it as the target for any call forward behavior.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
01-13-2011 11:12 AM
Thanks a lot for your help. I'm new to supporting Cisco Unified products obviously. I will research hunt pilots. Thanks for the suggestion.
01-13-2011 11:19 AM
Okay, here's my scenerio. I have an analog set on the outside wall of a docking area configured on a VG224. I need it to dial several external cell phone numbers in a line group type situation either by setting up a hotdial or a speed dial button. Problem is I also need to keep this analog set on our "on net only" css so it can't call external numbers by using the key pad. Having little experience with Cisco, I'm all over the place trying to find out the best way to accomplish it. Do you have a suggestion?
01-13-2011 11:28 AM
If you mean you want them to dial a hunt pilot and then ring mobiles the only way to do this is to configure SNR on the members of the line group.
They don't need any access to the route patterns for external calls for SNR to work.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
01-13-2011 11:34 AM
Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide