Integrate CCA with CME

[haqiq.salaheddine]

Hello All,

I have a CME router in GNS3 and I have the software CCA in my computer

I want to integrate the CCA software ( Cisco-config-assistant ) into the CME

Could you tell me how I can do that?

Thanks a lot

[Mark Malone · Accepted solution]

hmm the routers in GNS3 I wouldn't think the IOS versions support those images for CCA , even the IOU is Linux software images not exact real IOS versions in GNS3 so they definitely wont see it

if you check the data sheet for the CCA it will tell you what version it supports

Looking at one of the versions I don't see any routers that GNS3 supports that CCA supports either

http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/configuration-professional/data_sheet_c78_462210.html

Table 2. Cisco Configuration Professional Express 2.7 and Later Supported Cisco Router Products and Software Releases

Model	Earliest IOS M train version supported Cisco CP Express 2.7	Earliest IOS T train version supported Cisco CP Express 2.7
Cisco 812 series	15.2(4)M2	No T trains available
Cisco 819 series	15.2(4)M2	15.3(1)T
Cisco 860 series	15.2(4)M2	15.3(1)T
Cisco 880 series	15.2(4)M2	15.3(1)T
Cisco 890 series	15.2(4)M2	15.3(1)T
Cisco 1900 series	15.2(4)M2	15.3(1)T
Cisco 2900 series	15.2(4)M2	15.3(1)T
Cisco 3900 series	15.2(4)M2	15.3(1)T

[haqiq.salaheddine]

Thank you :)