07-10-2009 01:05 PM - edited 03-18-2019 11:20 PM
When configuring Mobile voice access, after I follow the configuration, and I try to dial the number that I assigned for mobile access i get the following error
108282: Jul 10 20:04:56.200: %CALL_CONTROL-6-APP_NOT_FOUND: Application cmm in dial-peer 4143 not found. Handing callid 115013 to the alternate app .
108283: Jul 10 16:04:56.212: ISDN Se0/3/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x9B6A
Cause i = 0x80BF - Service/option not available, unspecified
Does anybody knows where to get from the VXM script for this application?
thanks
07-16-2009 05:59 AM
This may be because the inbound dial peer is pointing to an unavailable application. The call is being handed to the alternate application or is rejected. So try to reconfigure the dial peer to have a valid application name, or verify that the application is accessible at its location.
07-16-2009 07:10 AM
Yes. You were right.
had a typo on my dial-peer configâ¦
I had configured
application
service ccm http://10.120.1.11:8080/ccmivr/pages/IVRMainpage.vxml
!
My dial peer config was
dial-peer voice 4143 pots
description incoming d-p for Mobile Voice Access service
service cmm ??
incoming called-number 4143
no digit-strip
So I changed it to
dial-peer voice 4143 pots
description incoming d-p for Mobile Voice Access service
service ccm **
incoming called-number 4143
no digit-strip
That did it... Thanks..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide