Second server for Cisco CMBE 6000 in HA

[jacinto1m]

Hi,

Could anybody advise on what is the part code for the second server (C200 Server or MCS server) that I would need?

Any help is much appreciated.

[jacinto1m]

I have found the below:

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/solution_overview_c22-597556.html

Cisco UCS C200 M2: Tested Reference Configuration 1 (UCS-C200M2-VCD2 or UCS-C200M2-BE6K)

This tested reference configuration is typically used for deployments that would normally run on Cisco MCS 7816, MCS 7825, or MCS 7828 servers. Application co-residency is supported as described at http://www.cisco.com/go/uc-virtualized; note that this server is sized only for virtual machines supporting 1000 users or fewer. If you are purchasing this server as part of Cisco Unified Communications Manager Business Edition 6000, note that you must order a different part number (refer to Table 1).

BUT THOSE PART CODES SEEM TO BE INVALID!