Xmedius Setup in Cisco Ipt Netowk

[aman_chugh]

Hi,

I need some help in understanding ,how a Xmedius fax server integreates into a cisco ipt network which consists of Callmanager 4.0.2 ,Unity 4.0.3. in unified messaging,

1.What configurations are required on callmanager .

2.What configurations are required on Unity,That is what do i achieve by running the third party fax configuration tool on Unity

3.What protocol should i use on the gateway talking to xmedius fax server ,

Any best practices for the integreation,any gotcha ,feel free to to mail as well at aman.chugh@gmail.com.

Thanks

Aman

[Hin Lee]

Fax Server Support for Cisco Unity 2.4.6.(x), 3.0.(x), 3.1.(x) and 4.0.(x)

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_tech_note09186a0080094566.shtml#topic1a

Unity IP Fax Inbound Gateway Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_configuration_example09186a0080387d62.shtml

Unity IP Fax Outbound Gateway Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_configuration_example09186a0080327711.shtml

Integrating a Fax Server with Cisco Unity

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_administration_guide_chapter09186a008022c902.html

Cisco Unity Troubleshooting Guide - Third-Party Fax Integration

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_troubleshooting_guide_chapter09186a008022b4cd.html