I am configuring Meeting Place 8.5. Can anyone please provide me Meeting Place 8.5 basic configuration guide. I have the cisco guide with me. I have created sip trunk in cucm and done basic configuration in Meeting Place server as per cisco guide. But when I test calling meeting place number, the call gets disconnected. Something somewhere I have missed. I have successfully imported the users to the meeting place server. Thank u.
Are you using EMS or HMS? Can you make sure you have correct configuration on SIP trunk (CUCM side) and make sure on MP you have configured the correct CUCM configuration under SIP config.
Login to your MP as root and see check below:
1. cd /var/mp
2. ls -l
and see if you see cca directory or not? If not then looks like you configured the MP for HMS but you don't have hardware MCU or possibly MCU is not online or not configure properly.
If you see above directory do below:
tail -f tvsip* | grep -e '--'
make a test call and you will see sometihng on your screen, capture the whole stuff and post here will look tell you what's going on but if you don't see any calls coming that means call is not even landing to MP then check your CUCM for possibly PT, CSS, RP, RP, Trunk etc.
Please let me know if you need any more info.
If you need immediate assistance kindly open a TAC case.
Attracted by the concept of dial plan and the passion of writing, I launched a challenge to write a workbook with practical scenarios covering in details this concept, the result is a workbook with 30 practice labs treating many components such route patt...
Understanding Media Negociation in Interworking / Traversal Call : SIP <-> H323 through Expressway. Inside SDP and H245. Both signaling and Media goes through the Expressway so the IP address of expressway is offered to both SIP and H.323 endpoin...
Sometimes you troubleshoot the phone presence status issue, or you are wondering how the status is retrieved by IMP, the best place to start is to look at the SIP Publish message sent by the CUCM to IMP, Capture the SIP Publish message using wireshark, in...
The translation pattern is the most important tool in the Call Routing Process on Cisco Unified Communication manager.By definition a Translation Pattern is used to match the DIALED NUMBER (CALLED). After a match is found we perform a digits manipulation....
Sometimes, you want to populate the Self Service User ID and the Primary Extension + the Conference Now Meeting Number automatically with the IpPhone or Telephone Number LDAP Attribute used in the LDAP Directory configuration page when importing AD users ...