09-10-2015 09:16 AM - edited 03-01-2019 12:21 PM
Hi:
I have a Cisco UCS B200 M2, UCSM 2.2(3e). I just created a new vlan 400 (BKP_192.168.6.0). When I proceed to modify the vNIC Templates to add the newly created vlan 400, I receive the following warning message:
Modify Vlans
Your change:
Create: Network Vlan_BKP_192.168.6.0 (org-root/lan-conn-templ-DOL-prodA/if-Vlan_BKP_192.168.6.0)
Will require User Acknowledgement before the Reboot of:
Service Profile ESX-03 (org-root/ls-ESX-03) [Server:sys/chassis-1/blade-3]
Service Profile ESX-04 (org-root/ls-ESX-04) [Server:sys/chassis-2/blade-1]
Service Profile ESX-05 (org-root/ls-ESX-05) [Server:sys/chassis-2/blade-2]
Service Profile ESX-01 (org-root/ls-ESX-01) [Server:sys/chassis-1/blade-1]
Are you sure you want to apply the changes?
Pres Yes to disregard the warning and submit changes, No to quit the wizard
or Cancel to make changes to the current configuration
I found in a forum after a google search that when I modify a vNIC Template adding a vlan is a task that do not requires a hosts/blades reboot.
In this case, how do I proceed to successfull add the new vlan in the vNIC Templates? I have a total of 40 production VMware virtual servers distributed in these 4 hosts/blades.
Please refere to the attached document for more info
Thanks
Miguel Figueroa
Solved! Go to Solution.
09-10-2015 11:52 AM
Hello,
INFO][0xab9e8b90][Sep 10 12:58:50.728][ls:analyzeConfig] bindingChange 0, hostEthIfChange 0,hostEthIfProfileChange 0, hostEthIfQosChange 0,hostEthIfQosHostControlChange 0, hostEthIfNwCtrlChange 0, hostEthIfProfileRedeployRequired 0,hostFcIfChange 0, hostFcIfProfileRedeployRequired 0,hostFcIfPersChange 0, hostFcIfProfileChange 0, hostFcIfQosChange 0, hostFcoeIfChange 0, hostIfPCIeChange 0, vifChange 0, vlanChange 1, vsanChange 0, ipChange 0,bootOrderChange 0, biosProfileChange 0, bladeIdentityChange 0,agentPolicyChange 0, biosFwChange 0,storageControllerFwChange 0, adaptorHostFwChange 0,adaptorNwFwChange 0, mgmtControllerFwChange 0,localDiskPolicyChange 0, pinChange 0, solChange 0,flexFlashConfigChange 1, cimcVmediaConfigChange 0,epAuthChange 1,bootVnicChange 0, bootPXEChange 0, boardCtrlFwChange 0, errInsufficientResources 0,LocalDiskFwChange 1,pnuosConfig 1, rebootRequired 1,ConfigRename 0,FcZoneChange 0,failed 0,
Notice the items with a 1 next to them. The servers want to reboot to for:
flexFlashConfigChange 1
LocalDiskFwChange 1
You can also see your VLAN change pending:
vlanChange 1
Hope this helps.
Justin
09-10-2015 09:51 AM
09-10-2015 11:41 AM
Hi Justin:
I used putty for the ssh session. This what appears as soon as the modify vlan user ack message appears (the last screen shot inside the word doc I sent in the first post).
]
[INFO][0xab9e8b90][Sep 10 12:58:50.725][ls:checkPinning] ConfigIssues::checkPinning (org-root/ls-ESX-01/ether-eth0)(0)
[INFO][0xab9e8b90][Sep 10 12:58:50.725][ls:allocateEthIfVif] Dealing with DcxVif with Id[805], switchId[1]
[INFO][0xab9e8b90][Sep 10 12:58:50.725][app_sam_dme:config] [DefinitionBI::config] no QoS policy for Host Intf: sys/chassis-1/blade-1/adaptor-1/host-eth-1
[INFO][0xab9e8b90][Sep 10 12:58:50.725][ls:setVlanChange] ConfigChange: setVlanChange (FcManager::configFcIfVsans adaptor vlan NameChange or SwitchIdChange or LcChange Evaluation)
[INFO][0xab9e8b90][Sep 10 12:58:50.725][ls:setVlanChange] ConfigChange: setVlanChange (FcManager::configFcIfVsans switch vlan NameChange or SwitchIdChange or LcChange Evaluation)
[INFO][0xab9e8b90][Sep 10 12:58:50.725][app_sam_dme:config] HostEthIfProfile::config: org-root/ls-ESX-01/ether-eth0, hostEthIf: sys/chassis-1/blade-1/adaptor-1/host-eth-1
[INFO][0xab9e8b90][Sep 10 12:58:50.725][ls:checkPinning] ConfigIssues::checkPinning (org-root/ls-ESX-01/ether-eth0)(0)
[INFO][0xab9e8b90][Sep 10 12:58:50.725][ls:allocateEthIfVif] Dealing with DcxVif with Id[806], switchId[2]
[INFO][0xab9e8b90][Sep 10 12:58:50.725][app_sam_dme:config] [DefinitionBI::config] no QoS policy for Host Intf: sys/chassis-1/blade-1/adaptor-1/host-eth-1
[INFO][0xab9e8b90][Sep 10 12:58:50.725][ls:setVlanChange] ConfigChange: setVlanChange (FcManager::configFcIfVsans adaptor vlan NameChange or SwitchIdChange or LcChange Evaluation)
[INFO][0xab9e8b90][Sep 10 12:58:50.725][ls:setVlanChange] ConfigChange: setVlanChange (FcManager::configFcIfVsans switch vlan NameChange or SwitchIdChange or LcChange Evaluation)
[INFO][0xab9e8b90][Sep 10 12:58:50.725][app_sam_dme:config] HostEthIfProfile::config: org-root/ls-ESX-01/ether-eth0, hostEthIf: sys/chassis-1/blade-1/adaptor-1/host-eth-1
[INFO][0xab9e8b90][Sep 10 12:58:50.725][ls:config] oper vcon: 1
[INFO][0xab9e8b90][Sep 10 12:58:50.725][ls:configureEthVnics] STATIC/DYNAMIC going thru org-root/ls-ESX-01/ether-eth1 (orig assigned:1)
[INFO][0xab9e8b90][Sep 10 12:58:50.725][ls:configureEthVnics] host if (id:2)(dn:sys/chassis-1/blade-1/adaptor-1/host-eth-2)
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:config] Setting OperOrder on VicDn[org-root/ls-ESX-01/ether-eth1], OperOrder[2]
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:checkPinning] ConfigIssues::checkPinning (org-root/ls-ESX-01/ether-eth1)(0)
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:allocateEthIfVif] Dealing with DcxVif with Id[807], switchId[2]
[INFO][0xab9e8b90][Sep 10 12:58:50.726][app_sam_dme:config] [DefinitionBI::config] no QoS policy for Host Intf: sys/chassis-1/blade-1/adaptor-1/host-eth-2
[INFO][0xab9e8b90][Sep 10 12:58:50.726][app_sam_dme:config] HostEthIfProfile::config: org-root/ls-ESX-01/ether-eth1, hostEthIf: sys/chassis-1/blade-1/adaptor-1/host-eth-2
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:checkPinning] ConfigIssues::checkPinning (org-root/ls-ESX-01/ether-eth1)(0)
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:allocateEthIfVif] Dealing with DcxVif with Id[808], switchId[1]
[INFO][0xab9e8b90][Sep 10 12:58:50.726][app_sam_dme:config] [DefinitionBI::config] no QoS policy for Host Intf: sys/chassis-1/blade-1/adaptor-1/host-eth-2
[INFO][0xab9e8b90][Sep 10 12:58:50.726][app_sam_dme:config] HostEthIfProfile::config: org-root/ls-ESX-01/ether-eth1, hostEthIf: sys/chassis-1/blade-1/adaptor-1/host-eth-2
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:config] oper vcon: 1
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:init] adding 2 to mezz-id 1
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:init] adding 1 to mezz-id 1
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:init] lExisting 2, lRequired 2
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:configureFcVnics] mezz 1 size 2 ifs size 2
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:configureFcVnics] mezz 2 size 0 ifs size 0
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:configureFcVnics] mezz 3 size 0 ifs size 0
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:configureFcVnics] mezz 4 size 0 ifs size 0
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:cleanupFcVnics] going thru org-root/ls-ESX-01/fc-fc0
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:cleanupFcVnics] org-root/ls-ESX-01/fc-fc0 is orig assigned
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:cleanupFcVnics] going thru org-root/ls-ESX-01/fc-fc1
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:cleanupFcVnics] org-root/ls-ESX-01/fc-fc1 is orig assigned
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:configureFcVnics] going thru org-root/ls-ESX-01/fc-fc0
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:configureFcVnics] org-root/ls-ESX-01/fc-fc0 is orig assigned
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:configureFcVnics] vnic id : 3
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:configureFcVnics] host if: 1
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:config] Setting OperOrder on VicDn[org-root/ls-ESX-01/fc-fc0], OperOrder[3]
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:checkPinning] Check pinning (vnic=org-root/ls-ESX-01/fc-fc0)(swId=1)
[INFO][0xab9e8b90][Sep 10 12:58:50.726][ls:pinInterface] FCManager::pinInterface called for org-root/ls-ESX-01/fc-fc0
[INFO][0xab9e8b90][Sep 10 12:58:50.727][app_sam_dme:config] [DefinitionBI::config] no QoS policy for Host Intf: sys/chassis-1/blade-1/adaptor-1/host-fc-1
[INFO][0xab9e8b90][Sep 10 12:58:50.727][ls:config] oper vcon: 1
[INFO][0xab9e8b90][Sep 10 12:58:50.727][ls:configureFcVnics] going thru org-root/ls-ESX-01/fc-fc1
[INFO][0xab9e8b90][Sep 10 12:58:50.727][ls:configureFcVnics] org-root/ls-ESX-01/fc-fc1 is orig assigned
[INFO][0xab9e8b90][Sep 10 12:58:50.727][ls:configureFcVnics] vnic id : 4
[INFO][0xab9e8b90][Sep 10 12:58:50.727][ls:configureFcVnics] host if: 2
[INFO][0xab9e8b90][Sep 10 12:58:50.727][ls:config] Setting OperOrder on VicDn[org-root/ls-ESX-01/fc-fc1], OperOrder[4]
[INFO][0xab9e8b90][Sep 10 12:58:50.727][ls:checkPinning] Check pinning (vnic=org-root/ls-ESX-01/fc-fc1)(swId=2)
[INFO][0xab9e8b90][Sep 10 12:58:50.727][ls:pinInterface] FCManager::pinInterface called for org-root/ls-ESX-01/fc-fc1
[INFO][0xab9e8b90][Sep 10 12:58:50.727][app_sam_dme:config] [DefinitionBI::config] no QoS policy for Host Intf: sys/chassis-1/blade-1/adaptor-1/host-fc-2
[INFO][0xab9e8b90][Sep 10 12:58:50.727][ls:config] oper vcon: 1
[INFO][0xab9e8b90][Sep 10 12:58:50.727][vnic:validateIScsiOver] validateIScsiOverlayVnic (org-root/ls-ESX-01)(issues=0x0)
[INFO][0xab9e8b90][Sep 10 12:58:50.727][vnic:prevalidateVnicIS] prevalidateVnicIScsiIf: (org-root/ls-ESX-01)(issues=0x0)
[INFO][0xab9e8b90][Sep 10 12:58:50.727][vnic:configCompute] Entered IScsiBI::configCompute isEval 1
[INFO][0xab9e8b90][Sep 10 12:58:50.727][vnic:configCompute] Exiting IScsiBI::configCompute isEval 1
[INFO][0xab9e8b90][Sep 10 12:58:50.727][ls:setEpAuthChange] ConfigChange: setEpAuthChange (EpAuthProfileBI::config)
[INFO][0xab9e8b90][Sep 10 12:58:50.727][ls:configLsZones] IniGroupBi::configLsZones() started for sp org-root/ls-ESX-01.
[INFO][0xab9e8b90][Sep 10 12:58:50.727][ls:configBootZones] BootConfig is Existing
[INFO][0xab9e8b90][Sep 10 12:58:50.727][ls:configLsZones] IniGroupBi::configLsZones() finished for sp org-root/ls-ESX-01.
[INFO][0xab9e8b90][Sep 10 12:58:50.727][app_sam_dme:prevalidat] PCV *AnalyzeImpact* Server[sys/chassis-1/blade-1] Deleted VlanPorts Sw[A]-[0], Sw[B]-[0]
[INFO][0xab9e8b90][Sep 10 12:58:50.728][ls:analyzeConfig] AnalyzeConfig: ack-phys[sys/chassis-1/blade-1] ls-phys[sys/chassis-1/blade-1]
[INFO][0xab9e8b90][Sep 10 12:58:50.728][ls:analyzeConfig] bindingChange 0, hostEthIfChange 0,hostEthIfProfileChange 0, hostEthIfQosChange 0,hostEthIfQosHostControlChange 0, hostEthIfNwCtrlChange 0, hostEthIfProfileRedeployRequired 0,hostFcIfChange 0, hostFcIfProfileRedeployRequired 0,hostFcIfPersChange 0, hostFcIfProfileChange 0, hostFcIfQosChange 0, hostFcoeIfChange 0, hostIfPCIeChange 0, vifChange 0, vlanChange 1, vsanChange 0, ipChange 0,bootOrderChange 0, biosProfileChange 0, bladeIdentityChange 0,agentPolicyChange 0, biosFwChange 0,storageControllerFwChange 0, adaptorHostFwChange 0,adaptorNwFwChange 0, mgmtControllerFwChange 0,localDiskPolicyChange 0, pinChange 0, solChange 0,flexFlashConfigChange 1, cimcVmediaConfigChange 0,epAuthChange 1,bootVnicChange 0, bootPXEChange 0, boardCtrlFwChange 0, errInsufficientResources 0,LocalDiskFwChange 1,pnuosConfig 1, rebootRequired 1,ConfigRename 0,FcZoneChange 0,failed 0, serverIssues 0x0, networkIssues 0x0, storageIssues 0x0, vnicIssues 0x0, iscsiIssues 0x0 FLAGS APPLIED: 0x0, willExecute 0
[INFO][0xab9e8b90][Sep 10 12:58:50.728][ls:isUserAckRequired] Maint policy: org-root/maint-MaintenPolicy, user ack IS required
[INFO][0xab9e8b90][Sep 10 12:58:50.728][app_sam_dme:fsmLsServe] Starting (stage=sam:dme:LsServerConfigure:WaitForMaintPermission)(dn=org-root/ls-ESX-01)
[INFO][0xab9e8b90][Sep 10 12:58:50.730][app_sam_dme:fsmCompute] SP-Rename: AssociateFSM Begin Qual [sys/chassis-2/blade-3]
[INFO][0xab9e8b90][Sep 10 12:58:50.730][app_sam_dme:fsmCompute] SP-Rename: Starting (stage=sam:dme:ComputePhysicalAssociate:begin)(dn=sys/chassis-2/blade-3)
[INFO][0xab9e8b90][Sep 10 12:58:50.730][app_sam_dme:muComputeP] muComputePhysicalComputeChangeCb invoked
[INFO][0xab9e8b90][Sep 10 12:58:50.730][app_sam_dme:muComputeP] Looking at adapter sys/chassis-2/blade-3/adaptor-1
[INFO][0xab9e8b90][Sep 10 12:58:50.732][app_sam_dme:fsmCompute] Starting (stage=sam:dme:ComputePhysicalAssociate:downloadImages)(dn=sys/chassis-2/blade-3)
[INFO][0xab9e8b90][Sep 10 12:58:50.733][app_sam_dme:fsmCompute] Starting (stage=sam:dme:ComputePhysicalAssociate:copyRemote)(dn=sys/chassis-2/blade-3)
[INFO][0xab9e8b90][Sep 10 12:58:50.736][app_sam_dme:fsmCompute] Re-setting Non-Fatal Warnings on Service Profile[org-root/ls-ESX-06] Server[sys/chassis-2/blade-3]
[INFO][0xab9e8b90][Sep 10 12:58:50.743][app_sam_dme:fsmCompute] SP-Rename: AssociateFSM Begin Qual [sys/chassis-1/blade-2]
[INFO][0xab9e8b90][Sep 10 12:58:50.743][app_sam_dme:fsmCompute] SP-Rename: Starting (stage=sam:dme:ComputePhysicalAssociate:begin)(dn=sys/chassis-1/blade-2)
[INFO][0xab9e8b90][Sep 10 12:58:50.743][app_sam_dme:muComputeP] muComputePhysicalComputeChangeCb invoked
[INFO][0xab9e8b90][Sep 10 12:58:50.743][app_sam_dme:muComputeP] Looking at adapter sys/chassis-1/blade-2/adaptor-1
[INFO][0xab9e8b90][Sep 10 12:58:50.745][app_sam_dme:fsmCompute] Starting (stage=sam:dme:ComputePhysicalAssociate:downloadImages)(dn=sys/chassis-1/blade-2)
[INFO][0xab9e8b90][Sep 10 12:58:50.745][app_sam_dme:fsmCompute] Starting (stage=sam:dme:ComputePhysicalAssociate:copyRemote)(dn=sys/chassis-1/blade-2)
[INFO][0xab9e8b90][Sep 10 12:58:50.749][app_sam_dme:fsmCompute] Re-setting Non-Fatal Warnings on Service Profile[org-root/ls-ESX-02] Server[sys/chassis-1/blade-2]
[INFO][0xab9e8b90][Sep 10 12:58:50.758][sam_dme:formatSuccessR] In formatSuccessRspConfigEstimateImpactCb
[INFO][0xab9e8b90][Sep 10 12:58:50.758][ls:isDeploymentDeferre] Maint policy: org-root/maint-MaintenPolicy, deployment IS NOT deferred
[INFO][0xab9e8b90][Sep 10 12:58:50.758][ls:isUserAckRequired] Maint policy: org-root/maint-MaintenPolicy, user ack IS required
[INFO][0xab9e8b90][Sep 10 12:58:50.758][ls:isDeploymentDeferre] Maint policy: org-root/maint-MaintenPolicy, deployment IS NOT deferred
[INFO][0xab9e8b90][Sep 10 12:58:50.758][ls:isUserAckRequired] Maint policy: org-root/maint-MaintenPolicy, user ack IS NOT required
[INFO][0xab9e8b90][Sep 10 12:58:50.758][ls:isDeploymentDeferre] Maint policy: org-root/maint-MaintenPolicy, deployment IS NOT deferred
[INFO][0xab9e8b90][Sep 10 12:58:50.758][ls:isUserAckRequired] Maint policy: org-root/maint-MaintenPolicy, user ack IS required
[INFO][0xab9e8b90][Sep 10 12:58:50.758][ls:isDeploymentDeferre] Maint policy: org-root/maint-MaintenPolicy, deployment IS NOT deferred
[INFO][0xab9e8b90][Sep 10 12:58:50.758][ls:isUserAckRequired] Maint policy: org-root/maint-MaintenPolicy, user ack IS required
[INFO][0xab9e8b90][Sep 10 12:58:50.758][ls:isDeploymentDeferre] Maint policy: org-root/maint-MaintenPolicy, deployment IS NOT deferred
[INFO][0xab9e8b90][Sep 10 12:58:50.758][ls:isUserAckRequired] Maint policy: org-root/maint-MaintenPolicy, user ack IS required
[INFO][0xab9e8b90][Sep 10 12:58:50.758][ls:isDeploymentDeferre] Maint policy: org-root/maint-MaintenPolicy, deployment IS NOT deferred
[INFO][0xab9e8b90][Sep 10 12:58:50.758][ls:isUserAckRequired] Maint policy: org-root/maint-MaintenPolicy, user ack IS NOT required
[INFO][0xab9e8b90][Sep 10 12:58:52.041][fsm:trigger] global limit 48 processed 2 queue 0 pending 0
Thanks
Miguel
09-10-2015 11:52 AM
Hello,
INFO][0xab9e8b90][Sep 10 12:58:50.728][ls:analyzeConfig] bindingChange 0, hostEthIfChange 0,hostEthIfProfileChange 0, hostEthIfQosChange 0,hostEthIfQosHostControlChange 0, hostEthIfNwCtrlChange 0, hostEthIfProfileRedeployRequired 0,hostFcIfChange 0, hostFcIfProfileRedeployRequired 0,hostFcIfPersChange 0, hostFcIfProfileChange 0, hostFcIfQosChange 0, hostFcoeIfChange 0, hostIfPCIeChange 0, vifChange 0, vlanChange 1, vsanChange 0, ipChange 0,bootOrderChange 0, biosProfileChange 0, bladeIdentityChange 0,agentPolicyChange 0, biosFwChange 0,storageControllerFwChange 0, adaptorHostFwChange 0,adaptorNwFwChange 0, mgmtControllerFwChange 0,localDiskPolicyChange 0, pinChange 0, solChange 0,flexFlashConfigChange 1, cimcVmediaConfigChange 0,epAuthChange 1,bootVnicChange 0, bootPXEChange 0, boardCtrlFwChange 0, errInsufficientResources 0,LocalDiskFwChange 1,pnuosConfig 1, rebootRequired 1,ConfigRename 0,FcZoneChange 0,failed 0,
Notice the items with a 1 next to them. The servers want to reboot to for:
flexFlashConfigChange 1
LocalDiskFwChange 1
You can also see your VLAN change pending:
vlanChange 1
Hope this helps.
Justin
09-10-2015 12:17 PM
Hi Justin:
Yesterday I just finished restarting all the 6 blades that compose the 2 chasis in our UCS infrastructure. Learning from your last post, I have to make something else to clear the change pendings out of the UCS. I don't have clear if, Selecting the Yes option in the User Ack warning message, UCS will immediately will reboot the hosts/blades or it will give a break to shutdown the VMs first and then reboot the hosts/blades.
Thanks a lot for your support, I just making my first steps in the Cisco UCS World.
Miguel Figueroa
09-10-2015 12:22 PM
Hello,
As long as your maintenance policy on these servers is set to user_ack you will just have pending activities for a reboot. Until then the blades will not reboot.
https://supportforums.cisco.com/document/122691/understanding-and-configuring-cisco-ucs-maintenance-policy
Thanks,
Justin
09-11-2015 10:01 AM
Hi Justin:
Thanks for your help. I want to share this youtube link. Its clearly explains all about UCS Maintenance Policy settings.
https://www.youtube.com/watch?v=QQTlm98NgTI
Thanks a lot for your help!!!
Miguel Figueroa
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Hello,
Usually there is another task such as a firmware update this is waiting to run in the background. If you want to see what is causing this start an SSH session to one of your fabric interconnects. Be sure you are logging the session and run the following commands:
connect local-mgmt
tail-mgmt-log svc_sam_dme
now try to apply the vlan to the template again. You should see a bunch of logging output in the SSH session. If you can put that in your next post we can probably determine what else is pending that is making the server want to reboot.
Thanks
Justin