cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
527
Views
0
Helpful
3
Replies

SAS LSI 2008i RAID controller compatibility with UCS-HD600G10K12G

Gonuguntla Gopi
Beginner
Beginner

Dear Friends,

One of my customer has C240M3S server with SAS  LSI 2008i RAID controller & A03-D600GA2 HDD .  Right now customer want to upgrade the server with additional drives of "A03-D600GA2 " . Unfortunately cisco announced these drives as EOL due to newer generation servers & speed demand.

Cisco EOL document says the replacement is UCS-HD600G10K12G . But it is not listed any where in the support matrix in Cisco documents. Up to my knowledge these repalcement HDD are supported by 12GBPS storage/RAID controllers only.

http://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/eos-eol-notice-c51-737249.html

Could you guys please help me with right solution.

Regards,

Gopi G

3 Replies 3

Kirk J
Cisco Employee
Cisco Employee

Greetings.

I'm guessing you have a C220M3 if the LSI 2008 mezz controller is in use.

Checking the C220M3 spec sheet at http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/c220m3-sff-specsheet.pdf the replacement drive you referenced, UCS-HD600G10K12G, is listed there as a valid option.

Based on the specsheet the UCS-HD600G10K12G drives will work, and are supported.

Thanks,

Kirk...

Dear Krik,

Thanks for the valuable information 

We are having C240M3 .

Regards,

Gopi G

The C240M3 specsheet also lists that drive, so you are covered, as far as compatibility goes.

Thanks,

Kirk...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers