UCS Manager Error at LDAP Provider

[naveenvm06@gmail.com]

Here at LDAP provider details

Bind DN:

Base DN: 

port: 389 or 636
enable ssh:
Filter: $AMAccountName=$userid (here i m mentioned my CN name , which group i need to add , getting error here)
attribute:
password:
confirm password:
timeout : 30
vendor : ms ad

i tried different ways still im getting an error at filter and if i mentioned $userid , i m getting authentication error when i m going to login with particular group. 

please check below image. give me solution for this.

[Kirk J]

Greetings.

The filter sAMAccountName=$userid is the string that should be there.

Generally you don't change this for MS AD.

Please run some CLI tests (pulled from https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-infrastructure-ucs-manager-software/200092-UCSM-LDAP-Troubleshooting-guide.html

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/sample_configurations/UCSM_1_4_LDAP_with_AD/b_Sample_Configuration_LDAP_with_AD/b_Sample_Configuration_LDAP_with_AD_chapter_010.html

ucs(nxos)# test aaa server ldap <LDAP-server-IP-address> <username> <password>

Thanks,

Kirk...

[naveenvm06@gmail.com]

still i m getting user authentication error. how can i resolve that.

[Kirk J]

What did you get when you ran:

ucs(nxos)# test aaa server ldap <LDAP-server-IP-address> <username> <password>

?

Please confirm if your bind user gets an error, and look through the rest of the troubleshooting steps listed in https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-infrastructure-ucs-manager-software/200092-UCSM-LDAP-Troubleshooting-guide.html

Thanks,

Kirk...