Here is a brief introduction to the new 3.1(1ePE1) UCS Platform Emulator showing how to perform backup and restore(import) of the current UCSM configuration. Backup/restore of the configuration is a good practice in general and is necessary with the new Platform Emulator since UCSM configuration state is lost on Platform Emulator resets.
The UCSM GUI, CLI, PowerTool for UCS, and/or the PythonSDK can be used to perform backup/restore operations. This video uses the PythonSDK, which is in beta and currently available on GitHub.
Backup operations in the video are done with backup_ucs(). Here's a code snippet:
Dear all, We purchased old B200 M3 for our development environment and they are not discovered by our UCS Manager 4.X. We suspect that's because they came with a very old firmware (find some old bug around that with the same error message). Is there ...
Added ISO file by activating virtual devices , but the same is not available during boot after warm reboot in the boot menu . we have HTML based kvm . Refer the attachment and let me know if you need more details.
Just purchased 2 x C220-M5SX servers to add to existing fabric.Using FW version 4.1.3(b).Servers have VIC 1457 Quad Port 10/25G SFP28 CNA MLOM installed.If I connect the server to the FIs using the VIC 1457, the server will attempt to discovery but s...
I have a few rack-mount servers (C220 M3) spread around our data center, with Flash based CIMC GUI. To get around the Flash problem, I was thinking about hocking them up to a UCS manager (UCS 6248UP: which uses HTML5 instead of Flash). What is t...