*Keep in mind that is for M6 only and SW release 4.2(1) or later.
A new version of the script is posted below (v3). This version adds additional support for UEFI boot on UCS Rack Servers.
About the Cisco Standalone C-Series Host Update Utility USB Image Utility:
This utility is designed to assist users who want to update firmware on their standalone C-Series server from a USB drive. Specific, this utility will write the HUU ISO image to a bootable USB stick. This USB stick can be used to update firmware on a standalone C-Series server either by changing the boot order or manually selecting the USB device in the <F6> boot menu.
Requirements: - HUU USB Image Utility - Linux Server (Tested with RHEL 6.4 and CENTOS 6.4) - The following package must be installed: syslinux-4.02-8.el6.x86_64 (or later) - Standalone C-Series HUU Image (to be written)
Note: You may need to unmount the drive to properly execute the script. (umount <dev>)
sh create_util_usb_v2.sh <UCSB Device> <file.iso>
OR sh create_util_usb_v2.sh /dev/sdb ucs-c240-huu-184.108.40.206.iso
Hi all, we are going to upgrade our existing 6248UP Fabric Interconnects to new 6454 FIs and are currently planning the migration. I have read through the migration guide at https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager...
Hello, I bought a USC C220 M4 and installed the following components: 2 x Intel XEON e5 2696 v4,8 x DDR4 ECC REG 16GB The problem is that the system keeps powercycling when I try to boot the system.While the system is booting the syst...
The current Storage Policy - Disk Group Policy "ST0_RAID1" is used on a bunch of rack servers with 2x HDD for RAID1 boot LUN. We now have SSD drives in our newer C240s and thus the Disk Group Policy will not work as it it specifically looking for HDD inst...
Hi All i need to change my JBOD option on my Controller from False to TRUE. I am using UCSC-RAID-M5HD (Cisco 12G Modular Raid Controller with 4GB cache) on the UCS C240 M5SX. anyone can help me..? thanks