cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

644
Views
5
Helpful
1
Replies
Highlighted

Running HyperFlex Version

I have a HyperFlex that has been sitting for a few months and was wondering how does one get the version installed from the factory? Can you do a "show ver" after you configure the fiS?

tHANKS

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

ESXi comes factory installed

ESXi comes factory installed onto the HX converged nodes.  The HX installer is what deploys the HX software, configures the environment and deploys the storage controller VMs.  Here are the software links: https://software.cisco.com/download/release.html?mdfid=286305544&softwareid=286305994&release=2.1(1b)&relind=AVAILABLE&rellifecycle=&reltype=latest

Please review the following link for the Preinstall checklist and getting started guide: http://www.cisco.com/c/en/us/support/hyperconverged-systems/hyperflex-hx-data-platform-software/products-installation-and-configuration-guides-list.html

View solution in original post

1 REPLY 1
Highlighted
Cisco Employee

ESXi comes factory installed

ESXi comes factory installed onto the HX converged nodes.  The HX installer is what deploys the HX software, configures the environment and deploys the storage controller VMs.  Here are the software links: https://software.cisco.com/download/release.html?mdfid=286305544&softwareid=286305994&release=2.1(1b)&relind=AVAILABLE&rellifecycle=&reltype=latest

Please review the following link for the Preinstall checklist and getting started guide: http://www.cisco.com/c/en/us/support/hyperconverged-systems/hyperflex-hx-data-platform-software/products-installation-and-configuration-guides-list.html

View solution in original post

CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey