Join Cisco Technical Marketing Engineers and other data center management experts for a discussion on the newly introduced type of UCS domain focuses at remote / branch office deployments. You will learn in detail and see demonstrations of the newly released solution including hardware components, network connectivity options, and manageability of the solution. This TechTalk will feature the newly released UCS 6324 Fabric Interconnect, UCS Manager version 3.0(1), and managing the branch office solution at scale with UCS Central.
Moderator :
Eric Williams, Technical Marketing Engineer, Cisco
We have Fabric A and fabric b each FI has 4 x 8 Gbps (8 total) - these are NOT connected via Port-channel We have concerns that these links may becoming saturated. How can i verify this from UCS manger? is it do-able or do...
view more
Newbie post but I'm getting conflicting advice and would appreciate some thoughts. We have a UCS environment currently running 2.2(8L) and wish to upgrade to 3.X or 4.X to allow us to purchase and add some M5 blades in preparation for a vSphere upgra...
view more
Running UCS 6232 16UP fabric Interconnects with firmware 4.0.2dConnecting a UCS C220 M5SX server with a VIC 1385 card in PCIe slot 1. Direct Attach.Making a policy for the server and attach it.Before attaching the server to FI, I had VMware ESXi 6.7 u2 in...
view more
I have a B200 M4 with a UCSB-VIC-M83-8P that lost its connections all of a sudden. I reacknowledged the blade and all looks good now, but I'm trying to figure out what happened. What kind of action would cause this? I don't expect anyone...
view more
Hi,I've got C220-M4 server located far away in data center. The problem is that I became server owner, however previous owner could not provide credentials to CIMC. So, I've got CIMC IP address but I cannot log-in.Is there any way to reset CIMC passw...
view more
