Hi,I upgraded the firmware to latest and apparently i've lost couple of options inlcuding TCP Dump in diagnostic as well as I cannot find how to disable/enable an ethernet port. Can someone please help on this ?
Hi,Following is the topology:NK7 Server VLAN1: Source: 10.1.1.10 Mask: 255.255.255.0 GW: 10.1.1.1NK7 Route: 192.168.0.0/24 gw 10.1.1.2Both networks are sitting on the same switch with a trunk going to N7K. At the moment, we've been pu...
Guys,i am in a bit of trouble - CPU utilization for a 4507r is around 90% and show platform health, showsK2FibFlowCache flow 2.00 44.91 10 8 100 500 66 55 32 576:09it means something wrong with PBR Cache Management, i tried remov...
We have a scenario - 2 sites connected via 2 routersHome-A ---------------- 6 Mbps Full Duplex Radio Link (Ethernet) -------------- BHome-A ---------------- 2Mbps Serial Link - DXX ----------------------- BHome-A ---------------- 2Mbps Serial Link -...
Guys,Following is the scenario:EZVPN-SERVER----->3745(EZVPNCLIENT)-----RADIO LINK -----> HOST80.x.x.x--->202.x.x.x/10.1.10.x---->10.73.1.0/24A 3745 is connecting to a PIX 515 using IOS EzVPN client. The internal interface on 3745 have 10.1.10.x IP , ...
Hi Andy,I downloaded the latest one last night - here's some more details:Model: SRP527W, ADSL2+ AnnexA, 802.11n ETSI, 2FXS/1FXO Version ID: V01 Hardware Version: 4.1.0 Boot Version: 1.1.22 (Feb 22 2011 - 09:42:55) Firmware Version: 1.01.27 (007) Ju...
Hi Brett,We've been looking for many stencils regarding new 4506-E but haven't found them yet. Any idea when this would be available ?e.g. I'm looking for following:WS-X45-SUP7-E=WS-X4748-RJ45-E=WS-X4712-SFP+E=WS-X4624-SFP-E=thanks,Shak
90% i like constant between (85-99% variation). i have attached the said output.also ACL is meant for squid (caching) like:Extended IP access list SQUID 10 deny ip any 10.0.0.0 0.255.255.255 (3760 matches) 20 deny ip any 128.100.0.0 0.0.255.255...