Hello Experts,
I have newly purchased Cisco Stackable Switches. but the issue im facing is that, all interfaces in the stack are showing as (shutdown/off). even i tried to manually turn-on the interfaces using command (no shut), but still all ...
Hello ,
I want to order new switches for my organization, but I need some info regardless.
Can any one tell me, through which mechanisms we can configure or manage Meraki Switches ?
As in Cisco Cat Switches, we can configure and manage them us...
Hello,
I have issue accessing FTP links through my Cisco Firepower ASA 5545. Although FTP inspection is enabled on my Firewall, but still I can not access any public ftp links.
Bellow error I get on my ASA logs:
4|May 08 2017|11:12:32|50...
Hello,
I want to enable syslog logging on my ASA, the syslog server is connected into my ASA mgmt-int. I tried a lot, the asa is not sending any logs into the syslog-server.
Can you see my config and comment, where the issue could be ? is t...
Hello,
I want to enable syslog logging on my ASA, the syslog server is connected into my ASA mgmt-int. I tried a lot, the asa is not sending any logs into the syslog-server.
Can you see my config and comment, where the issue could be ? is t...
Hello Leo,
here is the output of the commands you asked:
show cable-diagnostics tdr interface gigabitEthernet 1/0/1TDR test last run on: July 13 07:35:40
Interface Speed Local pair Pair length Remote pair Pair status--------- ----- ---------- ---...
But they are all in (unassigned YES unset down down) state. Although i have connected some interfaces with computers but still showing int down ...
Any idea please?
SWITCH#show ip interface brief Interface IP-Address OK? Method Status Protocol Vlan1 unassigned YES NVRAM administratively down down Vlan100 10.160.70.4 YES NVRAM up up FastEthernet0 unassigned YES NVRAM administratively down down GigabitEthernet1/0/...