07-11-2018 12:55 PM - edited 03-08-2019 03:38 PM
Hello Experts,
I have newly purchased Cisco Stackable Switches. but the issue im facing is that, all interfaces in the stack are showing as (shutdown/off). even i tried to manually turn-on the interfaces using command (no shut), but still all ints are showing down.
any idea, what could be the source of the issue ?
07-11-2018 01:19 PM
Hi,
What platform switch you have and what is connected to the ports?
HTH
07-12-2018 01:44 AM
I have switch model 2960x48-LPS-L, and i have connected computers into the ports.
Thanks
07-12-2018 01:45 AM
07-12-2018 07:27 AM
SWITCH#show ip interface brief Interface IP-Address OK? Method Status Protocol Vlan1 unassigned YES NVRAM administratively down down Vlan100 10.160.70.4 YES NVRAM up up FastEthernet0 unassigned YES NVRAM administratively down down GigabitEthernet1/0/1 unassigned YES unset down down GigabitEthernet1/0/2 unassigned YES unset down down GigabitEthernet1/0/3 unassigned YES unset down down GigabitEthernet1/0/4 unassigned YES unset down down GigabitEthernet1/0/5 unassigned YES unset down down GigabitEthernet1/0/6 unassigned YES unset down down GigabitEthernet1/0/7 unassigned YES unset down down GigabitEthernet1/0/8 unassigned YES unset down down GigabitEthernet1/0/9 unassigned YES unset down down GigabitEthernet1/0/10 unassigned YES unset down down GigabitEthernet1/0/11 unassigned YES unset down down GigabitEthernet1/0/12 unassigned YES unset down down GigabitEthernet1/0/13 unassigned YES unset down down GigabitEthernet1/0/14 unassigned YES unset down down GigabitEthernet1/0/15 unassigned YES unset down down GigabitEthernet1/0/16 unassigned YES unset down down GigabitEthernet1/0/17 unassigned YES unset down down GigabitEthernet1/0/18 unassigned YES unset down down GigabitEthernet1/0/19 unassigned YES unset down down GigabitEthernet1/0/20 unassigned YES unset down down GigabitEthernet1/0/21 unassigned YES unset down down GigabitEthernet1/0/22 unassigned YES unset down down GigabitEthernet1/0/23 unassigned YES unset down down GigabitEthernet1/0/24 unassigned YES unset down down GigabitEthernet1/0/25 unassigned YES unset down down GigabitEthernet1/0/26 unassigned YES unset down down GigabitEthernet1/0/27 unassigned YES unset down down GigabitEthernet1/0/28 unassigned YES unset down down GigabitEthernet1/0/29 unassigned YES unset down down GigabitEthernet1/0/30 unassigned YES unset down down GigabitEthernet1/0/31 unassigned YES unset down down GigabitEthernet1/0/32 unassigned YES unset down down GigabitEthernet1/0/33 unassigned YES unset down down GigabitEthernet1/0/34 unassigned YES unset down down GigabitEthernet1/0/35 unassigned YES unset down down GigabitEthernet1/0/36 unassigned YES unset down down GigabitEthernet1/0/37 unassigned YES unset down down GigabitEthernet1/0/38 unassigned YES unset down down GigabitEthernet1/0/39 unassigned YES unset down down GigabitEthernet1/0/40 unassigned YES unset down down GigabitEthernet1/0/41 unassigned YES unset down down GigabitEthernet1/0/42 unassigned YES unset down down GigabitEthernet1/0/43 unassigned YES unset down down GigabitEthernet1/0/44 unassigned YES unset down down GigabitEthernet1/0/45 unassigned YES unset down down GigabitEthernet1/0/46 unassigned YES unset down down GigabitEthernet1/0/47 unassigned YES unset down down GigabitEthernet1/0/48 unassigned YES unset up up GigabitEthernet1/0/49 unassigned YES unset down down GigabitEthernet1/0/50 unassigned YES unset down down GigabitEthernet1/0/51 unassigned YES unset down down GigabitEthernet1/0/52 unassigned YES unset down down GigabitEthernet2/0/1 unassigned YES unset up up GigabitEthernet2/0/2 unassigned YES unset down down GigabitEthernet2/0/3 unassigned YES unset down down GigabitEthernet2/0/4 unassigned YES unset down down GigabitEthernet2/0/5 unassigned YES unset down down GigabitEthernet2/0/6 unassigned YES unset down down GigabitEthernet2/0/7 unassigned YES unset down down GigabitEthernet2/0/8 unassigned YES unset down down GigabitEthernet2/0/9 unassigned YES unset down down GigabitEthernet2/0/10 unassigned YES unset down down GigabitEthernet2/0/11 unassigned YES unset down down GigabitEthernet2/0/12 unassigned YES unset down down GigabitEthernet2/0/13 unassigned YES unset down down GigabitEthernet2/0/14 unassigned YES unset down down GigabitEthernet2/0/15 unassigned YES unset down down GigabitEthernet2/0/16 unassigned YES unset down down GigabitEthernet2/0/17 unassigned YES unset down down GigabitEthernet2/0/18 unassigned YES unset down down GigabitEthernet2/0/19 unassigned YES unset down down GigabitEthernet2/0/20 unassigned YES unset down down GigabitEthernet2/0/21 unassigned YES unset down down GigabitEthernet2/0/22 unassigned YES unset down down GigabitEthernet2/0/23 unassigned YES unset down down GigabitEthernet2/0/24 unassigned YES unset down down GigabitEthernet2/0/25 unassigned YES unset down down GigabitEthernet2/0/26 unassigned YES unset down down GigabitEthernet2/0/27 unassigned YES unset down down GigabitEthernet2/0/28 unassigned YES unset down down GigabitEthernet2/0/29 unassigned YES unset down down GigabitEthernet2/0/30 unassigned YES unset down down GigabitEthernet2/0/31 unassigned YES unset down down GigabitEthernet2/0/32 unassigned YES unset down down GigabitEthernet2/0/33 unassigned YES unset down down GigabitEthernet2/0/34 unassigned YES unset down down GigabitEthernet2/0/35 unassigned YES unset down down GigabitEthernet2/0/36 unassigned YES unset down down GigabitEthernet2/0/37 unassigned YES unset down down GigabitEthernet2/0/38 unassigned YES unset down down GigabitEthernet2/0/39 unassigned YES unset down down GigabitEthernet2/0/40 unassigned YES unset down down GigabitEthernet2/0/41 unassigned YES unset down down GigabitEthernet2/0/42 unassigned YES unset down down GigabitEthernet2/0/43 unassigned YES unset down down GigabitEthernet2/0/44 unassigned YES unset down down GigabitEthernet2/0/45 unassigned YES unset down down GigabitEthernet2/0/46 unassigned YES unset down down GigabitEthernet2/0/47 unassigned YES unset down down GigabitEthernet2/0/48 un...
----------------------
SWITCH#show post Stored system POST messages: Switch 1 --------- POST: MA BIST : Begin POST: MA BIST : End, Status Passed POST: TCAM BIST : Begin POST: TCAM BIST : End, Status Passed POST: Inline Power Controller Tests : Begin POST: Inline Power Controller Tests : End, Status Passed POST: Thermal, Fan Tests : Begin POST: Thermal, Fan Tests : End, Status Passed POST: PortASIC Stack Port Loopback Tests : Begin POST: PortASIC Stack Port Loopback Tests : End, Status Passed POST: PortASIC Port Loopback Tests : Begin POST: PortASIC Port Loopback Tests : End, Status Passed POST: EMAC Loopback Tests : Begin POST: EMAC Loopback Tests : MAC Loopback Passed POST: EMAC Loopback Tests : PHY Loopback Passed POST: EMAC Loopback Tests : End, Status Passed Switch 2 --------- POST: MA BIST : Begin POST: MA BIST : End, Status Passed POST: TCAM BIST : Begin POST: TCAM BIST : End, Status Passed POST: Inline Power Controller Tests : Begin POST: Inline Power Controller Tests : End, Status Passed POST: Thermal, Fan Tests : Begin POST: Thermal, Fan Tests : End, Status Passed POST: PortASIC Stack Port Loopback Tests : Begin POST: PortASIC Stack Port Loopback Tests : End, Status Passed POST: PortASIC Port Loopback Tests : Begin POST: PortASIC Port Loopback Tests : End, Status Passed POST: EMAC Loopback Tests : Begin POST: EMAC Loopback Tests : MAC Loopback Passed POST: EMAC Loopback Tests : PHY Loopback Passed POST: EMAC Loopback Tests : End, Status Passed FR-
07-12-2018 03:07 PM
07-12-2018 09:55 PM - edited 07-12-2018 09:58 PM
But they are all in (unassigned YES unset down down) state. Although i have connected some interfaces with computers but still showing int down ...
Any idea please?
07-12-2018 10:48 PM
Pick a port that is currently connected and do the following:
1. Command: test cable tdr interface <PORT>;
2. Wait for approximately 5 to 7 seconds;
3. Command: show cable tdr interface <PORT>;
4. Post the complete output to #3.
07-13-2018 09:16 AM
Hello Leo,
here is the output of the commands you asked:
show cable-diagnostics tdr interface gigabitEthernet 1/0/1
TDR test last run on: July 13 07:35:40
Interface Speed Local pair Pair length Remote pair Pair status
--------- ----- ---------- ------------------ ----------- --------------------
Gi1/0/1 auto Pair A 0 +/- 10 meters N/A Open
Pair B 0 +/- 10 meters N/A Open
Pair C 0 +/- 10 meters N/A Open
Pair D 0 +/- 10 meters N/A Open
07-13-2018 05:56 PM
07-13-2018 08:10 PM
Dear Leo,
Then what solution you propose ?
07-13-2018 08:36 PM
@Imran Ahmad wrote:
Dear Leo,
Then what solution you propose ?
The cable test shows someone isn't doing his/her job properly.
A cable is patched to the switch but at the far end NOTHING is connected to the cable.
Just think about it: It is claimed that all ports are patched but the switch doesn't show a single port is active.
07-12-2018 12:22 AM
07-12-2018 01:47 AM
2960x-LPS-L
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide