hi all,when i try to ssh in to a switch i get a connection refused on port 22ssh robert@10.110.10.4ssh: connect to host 10.110.10.4 port 22: Connection refusedthanks,rob
hi all,if i change the switch's ip and hostname, can people still ssh in the switch with there pub key's or will they need to put back in there pub keys again as i need to redo thecrypto key generate rsathanks,rob
trying to recover an admin password for a 31108TCV but its not workingso i press ctrl+c and then it says press ctrl+l to go into recovery mode so i do then i do the commands below cmdline recoverymode=1
dir
boot n3000-uk9-kickstart.6.0.2.U6.8.bin
co...
hi all,how do you reset the above switch as theres no physical reset button, so i imagine its all done via command lineis it this write erase
reload
System configuration has been modified. Save? [yes/no]: n
Proceed with reload? [confirm]y
delete f...
hi all,got a nexus N3K-C31108TCV and when i connect a console cable to it i get a "loader" linethe switch is also noiser than the rest and its blinking SBS/SRS and the management NIC is always on (nothing plugged into it)do i have to start again, how...
that was laborius so on all the switches i changed the ip hostname i did this show crypto key mypubkey rsa
crypto key zeroize rsa {key}
crypto key generate rsa modulus 2048 now when i issue show rsa i get the correct key with hostname of switchnow tr...
so basically do the below for all the switches i changed the ip hostname plus do this for the switch im running the ssh username@{ip-address}crypto key zeroize rsa
crypto key generate rsa modulus 2048