Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
An IOS update on my 3560CG was interrupted, and when I attempted this again I was met with a 'unable to create temp dir flash:update' message. I found this thread with a similar problem, and followed steps to remove the flash folder. https://communit...
I have inherited a 2504 WLC (still running7.0.220.0) which has one corporate SSID defined.I intend to create a new SSID and interface for a guest network, which will be on a separate subnet and VLAN. The VLAN is yet to be defined.I am running into tr...
Oh wow! What a rookie mistake - thanks for spotting that both! It is indeed the 3560CG and looks like the photo in the link. I am going to use software from here instead. https://software.cisco.com/download/home/283733640/type/280805680/release/15.2....
Error loading "flash:/c3560c405ex-universalk9-mz.122-55.EX2/c3560c405ex-universalk9-mz.122-55.EX2.bin"Interrupt within 5 seconds to abort boot process.Boot process terminated.The system is unable to boot automatically. The BOOTenvironment variable ne...
It is a Cisco Catalyst 3560-CG and on the underside it says WS-C3560CG-8PC-S This is the link that I am using to locate the software is this: https://www.cisco.com/c/en/us/support/switches/catalyst-3560-8pc-compact-switch/model.html#~tab-downloads Ha...
Connected with Putty and pressed the Mode button as instructed. I let the 'executing...' run for 10 minutes, and nothing changed. Here are the boot logs as requested:Using driver version 1 for media type 1Base ethernet MAC Address: f4:ea:67:e5:08:00X...
The two screenshots are of the full process of my copying the .bin file and trying to install it.Since then, I have powered off, and back on, and caputred everything in the attached PDF file. Current uptime is 6m30. There is a cursor flashing under t...
