Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
I have a weird one, where remote access vpn using the Cisco VPN client on Windows 10 no longer works.
It connects and I can see that it is connected on the ASA, however I cannot get to any internal resources.
The VPN pool is 10.100.11.1-254...
Hi All,
I am hoping for some guidance here as i have been struggling with this for a day, i have not been able to bring up the tunnel between an XG230 and an ASA 5510-x.
The configuration on the ASA end:
access-list testvpn extended permit ip any <i...
Hi all,
Just wanted some advice on the best way to troubleshoot ACL's on an ASA.
Yesterday while configuring our VPN to AWS, i added a permit ip any any onto the end of an ACL to avoid the implied deny, however it dropped all external (internet acc...
Hmmm...Ok, works on a Windows 7 machine. Thoughts on why it would have stopped working randomly on Windows 10?
I know the client isn't supported on Win 10, but to just stop working?
Thanks for the response, I’d have to test with a user not on Windows 10 and get back to you.However, two laptops it did work on previously are now not working!
I have resolved my simultaneous Site to Site and Remote Access VPN issues.
Got an extra few public IPs and using NAT so my public IP is now different to the Site to Site IP.
The IP that is getting x'd out there is the off site public IP, once connected the client would get an IP from a specified range not in the local lan. It is specific to remote access VPN users. If that is what you are asking?
Ok so i used to be able to use a remote connect VPN back to the datacenter from this testsite. Since creating the tunnel and the site to site vpn, i can no longer remote connect.
Is this going to be possible anymore? It is the same originating IP ...
