Hi Guys. I configured the L2TP VPN as below using the RV340 Router.IPSec Profile is as follows. 1.Default (IKEv1) Phase I Options: Group 5, AES-128, SHA1 Phase II Options: ESP, AES-128, SHA1, Group5 The log found in RV40 is as follows.2020...
Hi Guys. I created a site to site VPN using the GRE tunnel on the RV340 Router.I want to pass a vlan tag over a VPN.Can vlan tag be delivered to Device with the following configuration?SiteA-> (with vlan tag) WAN-> VPN ------------ SiteB VPN-> LAN-> ...
Hi All. The interface is UP by configuring site to site VPN as shown below.I can also ping from 10.0.2.1 to 10.0.1.1.SiteA Router SiteB RouterWAN: 1.234.x.x 128.1.x.xTunnel : 10.0.1.0/24 ...
Hi. Guys. I created a Site to site VPN tunnel and verified that the VLAN ports on each route communicate with each other.And set up two RV340 devices as below to receive Multicast Stream. However, as shown in the figure below,the STB BOX device (conn...
Hi. I'm trying to setup a site to site vpn through RV340 Router. Here is my configuration 1. Router is default state. and I only add a VPN. 2. IPSec profile : IKEv2 Here is logs.2020-02-25T17:05:26+09:00 <info>charon: 07[IKE] received AUTHENTI...