I have a core 4507r+e in our production environment. We just acquired a 4500r and I would like to use it a distribution switch. What’s the best way to configure the new 4500r switch to connect to the core 4500 switch?
Yes, I can ping the new switch from the core.Both switches are on the native vlan 1.I have the gateway already set to the core on the new switch.Would it be better to send you my config to view? thanks
Yes, I can ping the new switch from the core.Both switches are on the native vlan 1.I have the gateway already set to the core on the new switch.Would it be better to send you my config to view? thanks
Jon,I setup the 4507r and connected it to the core 4507r+e. I setup trunking between the two switches and encapsulation 8021q. I can see the switch via cdp cdp neighbors and ping it. When im connected on the 4507r+e via my workstation i cant ping it...
Just one sup per 4500. The plan is to use the new 4500 to connect additional devices like server, and some workstation. The core handles all the traffic to and from the 3670 switches.
Jon, Looks like all traffic is routed back to the core 4500 switch. The are some 3750x that connect back to the core. The 4500 is in a single building and the 3750's are located at remote site connected via fiber. The new 4500 is going to be use to c...