Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a customer who has a lot of outages on their new SDA wireless setup. The setup is 4800 APs and redundant 5520 controllers running 8.10 software. What i'm seeing is that users experience outages lasting upwards around 3 minutes where they have ...
Hi, i have a site where we would like to conduct some wireless sniffing but are having some issues since the problem we suspect is AP->Controller traffic. It seems that we are losing some packets in the CAPWAP tunnel so an AP in sniffer mode on the s...
Hi, i get the error "this backup is not compatible with currently installed dnac" when trying to restore a backup. This backup is taken on one DNAC and being restored on a different DNAC, my question is:Is there any place where i can get a more detai...
Hi, As mentioned you can see from the output:"[*08/06/2020 00:17:04.3324] Discovery response from MWAR 'ABC' running version 8.5.140.0 is rejected." That the Code on the WLC does not support the AP, check the cisco wireless compatibility matrix: htt...
Hi Andrew,From the blinking behaviour i would say that the AP is trying to join the controller and failing since it doesn't move on.https://www.cisco.com/c/en/us/td/docs/wireless/access_point/1600/quick/guide/ap1600getstart.html#pgfId-37791 "Checking...
Hi Rasika, The problem i'm facing is that there may be packet loss on in the CAPWAP tunnel the current controller, so to make sure that i don't also miss alot of the captured packets i would like to have the sniffing handled locally. The reason being...
