cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
671
Views
10
Helpful
4
Replies

Experiencing a lot of outages on SDA wireless

I have a customer who has a lot of outages on their new SDA wireless setup.

 

The setup is 4800 APs and redundant 5520 controllers running 8.10 software.

 

What i'm seeing is that users experience outages lasting upwards around 3 minutes where they have little to no connection.

 

I tried doing a wireless packet capture both with DNAC data packet capture and 2 wireless sniffer AP's and what i see is that in the time period where the users are having problems they are mainly exchanging "Request to send/Clear to send" and "Block Ack requests/Block Acks", when this eventually stops the problem is gone again.

 

In the DNAC nothing is registered other than alot of TX retransmissions, i tried checking to see if it seemed like a coverage issue but my survey reaveled no problem with the coverage. 

 

Does anyone have any ideas as to what may cause this behaviour? 

1 Accepted Solution

Accepted Solutions

 

 

 - Make sure to use the recommended release 8.10.130.0 - here is a related  resolved bug.

                    https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvq90572

 M.



-- ' 'Good body every evening' ' this sentence was once spotted on a logo at the entrance of a Weight Watchers Club !

View solution in original post

4 Replies 4

marce1000
VIP
VIP

 

  - Have a sanity check of the controller configuration with :

                                https://cway.cisco.com/tools/WirelessAnalyzer/

 M. 



-- ' 'Good body every evening' ' this sentence was once spotted on a logo at the entrance of a Weight Watchers Club !

That does unfortunately not give me any insight, the warnings it's generating is not something i can use.

 

 

 - Make sure to use the recommended release 8.10.130.0 - here is a related  resolved bug.

                    https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvq90572

 M.



-- ' 'Good body every evening' ' this sentence was once spotted on a logo at the entrance of a Weight Watchers Club !

Great insight, after a software upgrade the issue seem to be gone.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: