Hi all,2 of our 1562 APs are not joining WLC9800. When consoled to AP found out that AP is going to U-Boot and keeps rebooting instead to finding controller. Already tried to reset env and changed partitionsHere is the complete output of AP console.B...

HelloFew APs are unable to join WLC 2504Controller IP is 192.168.1.10DHCP pool is made at cisco switch (192.168.1.0/24)Laptop and AP are getting ip from DHCP but AP is unable to join controllerAlso tried to give static ip to AP and told it controller...

Hi Community,I have been assigned task to configure 2x Cisco 4500 Series switches Both switches are of same model and shall have same iOS. Need to know physical topology of both switches , How to connect cables, and the configuration  Thanks in Advan...

Hi Guys,I cannot find few access points in WLC 9800 All APs are connected to switch and all interfaces are also in same VLAN.The thing is when is shutdown the switch interface, One AP is shown less in count in WLC 9800. When I turn on switch port AP ...

Hi,We have Catalyst 9800-40 WLC , and we are facing the issue "Two Access Points with same name are not able to join controller "I tried to add  new access points . Initially APs joined controller and their MAC ID was shown in Access point list. I we...