About nlawrance

nlawrance · 06-29-2020

I have three 24 port POE 9300 switch which is upgraded to Fuji 16.09.05 version .And our new switch is 48 port 9300 POE . Which is already in Gibraltar-16.12.02 version . Is it a problem to be in stack for 24 port switch with 48 port switch. And do ...

nlawrance · 03-18-2020

I upgraded my cisco 3850 switch from 3. to 16.9 . Ones i reloaded it asking for Keyboard interactive authentication password and for switch which i dont know.How can i get back to usermode.

nlawrance · 06-23-2020

You can boot the image from USB#boot usbflash0:filenametry this may work?

nlawrance · 06-23-2020

1)First give # dir fash:Check bin file is there in flash2)if not give command#copy tftp://192.168.3.47/file name flash: it copy image from tftp server to flash 3)Then package installation#request platform software package install file flash:<filename...

nlawrance · 05-18-2020

Thanks Whizkidraj, for your votes and marking as solution &All THE BEST!!!!!

nlawrance · 05-18-2020

Please give the command#show vlanthen you can see what all interface comes on that particular vlan number .Connect port to that any interface which you gave the ip address for that particular vlan number..I tried to give name mangent to vlan 1.but it...

nlawrance · 05-15-2020

1)First download the IOS image from CISO site2) copy that image to TFTP server folder and set the ip of the system in tftp server. IP should be the system ip. you can get it by IP config command through command prompt. 3)create a vlan and give an ip ...

Member Since	‎03-18-2020 06:41 AM
Date Last Visited	‎07-08-2020 08:41 PM
Posts	33
Total Helpful Votes Received	10

User Statistics

User Activity

IOS upgrade for 24 port and 48 port switches

Keyboard Interactive authentication

Re: Switch 3850 stacks upgrade failed and stuck in boot fail loop

Re: Cat 9300 firmware not upgrading

Re: Cisco IOS upgrade in depth

Re: Cisco IOS upgrade in depth

Re: Cisco IOS upgrade in depth