About SteveFreeberg4254

SteveFreeberg4254 · 09-18-2021

Hello, I am trying to register a new VG450 to CUCM as a SIP Gateway. This is working as expected, but I also need to be able to register the same VG450 as SCCP and MGCP. MGCP is fine, since it uses hostname.domain, SCCP is NOT working as it uses the ...

SteveFreeberg4254 · 04-03-2020

I am trying to use Message shuttle to move messages from a UCXN 10.5.1 system to UCXN 12.5.1 system and when I use Message Shuttle the target connection just hangs at loading data icon. I can switch the source and target and the source always loads t...

SteveFreeberg4254 · 09-20-2021

Nithin, Using the MAC from G0/0/1 has allowed me to add the SIP gateway successfully. I have two SIP analog endpoints registered and will be testing functionality later today. This works for my current client, as they have both G0/0/0 and G0/0/1 con...

SteveFreeberg4254 · 09-18-2021

Roger, I typically use the begining ports as one protocol, say SCCP and then on the MGCP gateway I used the last port and work towards the middle. I agree, you can only use a single protocol per port but you can most certainly use both protocols on...

SteveFreeberg4254 · 09-18-2021

Hey Roger, I have needed to use MGCP for analog faxing to support T.38 when client go with SIP PSTN circuits. I have needed SCCP for analog phone features, SCCP does not support T.38. The SIP VG450 CUCM registered gateway supports auto-registration f...

SteveFreeberg4254 · 09-18-2021

Roger, Starting with the VG450 you can add the device as a Voice Gateway in CUCM and choose SIP, MGCP or SCCP and the protocol. you absolutely need to use the last 10 of the MAC address. This is not a SIP trunk to the VG450. Use case...SIP gateway su...

SteveFreeberg4254 · 09-18-2021

Nithin, Thank you for your reply, but people have been using multi-protocols on the VG4XX/3XX forever. SCCP for features and MGCP for T.38 faxing support. I am unable to find any Cisco documentation that shows this is supported or not supported. SCCP...

Member Since	‎04-03-2020 12:18 PM
Date Last Visited	‎07-21-2023 12:02 AM
Posts	7
Total Helpful Votes Received	25

User Statistics

User Activity

Cisco VG450 SIP Gateway and SCCP Gateway registrations on same VG450

Unity Tools Message Shuttle Hangs at loading data for Target system

Re: Cisco VG450 SIP Gateway and SCCP Gateway registrations on same VG4

Re: Cisco VG450 SIP Gateway and SCCP Gateway registrations on same VG4

Re: Cisco VG450 SIP Gateway and SCCP Gateway registrations on same VG4

Re: Cisco VG450 SIP Gateway and SCCP Gateway registrations on same VG4

Re: Cisco VG450 SIP Gateway and SCCP Gateway registrations on same VG4