Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I recently moved my landline over to VOIP and the SPA112 has so far worked well. One thing I noticed is that even if I dial local numbers, I still have to add the national prefix, e.g. so for dialling 828171 I have to type in 01455 828171. Is it poss...
What is the pinout of the VOIP socket on the SPA112?I need to make up cables for our two DECT phones. I have mapped the pinout of the standard cables that come with each phone to plug it into the BT socket and it seems that there is no standard for t...
A couple of years ago or so I purchased a SRW2008 switch for the home office. This device has worked well and sat in the background without giving any trouble. Recently I needed to make a configuration change and discovered that the WebView admin por...
Turns out the advice on the A&A WiKi for configuring the device was incorrect. In bold lettering it said:"Do not use +44 as part of the username, otherwise the device will not register. You must use 0."Nevertheless, the rep pointed out that my creden...
I wasn't aware of this although the SPA112 seems to be at the latest firmware level (1.4.1, Oct 14, 2019). I see that there is a 'Recovery Firmware 1.3.0. Do I need to revert somehow?I do believe that line is on the two middle pins and have made and ...
Tried that but it made no difference, however I did discover that it works on an older version of Windows. It turns out that I can use it on Windows 7 but only in Internet Explorer, and only with compatibility mode enabled. It seems this device has a...
Atul,Thank you for your reply. In answer to your questions:Have you tried to reset the device?- yeshave you tested tested on different browsers/ OS- yes, both Windows and Linux, Firefox, Chrome, Chromium and Internet Explorer/Edgechanged security set...
