Hello All, We are currently deploying DNA-c to our enterprise network, and for one of our new campus sites we want to create an SDA fabric. In our shared services block we have one ISE doing NAC that will serve as the policy plane for the fabric (Tru...
Hello all, I am having issues provisioning WLC in my fabric, I have several questions : So, I installed the 9800 embedded WLC on the 9500 , everything went well for that, I activated the WLC Role in the fabric so I see C | B | W on my border node in...
Hello All, We are designing an SDA solution for campus and we have a question regarding Transit, Do you know if SDA transit and IP transit can be via the same external interface on the border node ? Or each one needs a specific physical interface ? H...
Hello Everyone, I have been assigned a project to extract a report of the QOS configuration for 1800+ devices (mostly Cisco C897 Routers). I want to compare all of the configurations and see if there are any misconfigured routers. There are 2 groups...
Hello Balaji, This is not fabric in a box setup but full fabric for small site : The 9500 is the one I circled in green, it's BN, CP and WLC. but in discovery it just finds the switch not the router, Netconf and everything is OK , look at the disc...
