Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Using a CSS 11501 switch to configure both Load balancing and server hot standby between two servers (of same config). Clients are connecting to the server using tcp/ip sessions. The configuration used is shown below:=================================...
Hi,We have a CallManager 3.1 with 7960 IP phones.We would like to interconnect this callmanager with an Altigen voice gateway present in a remote site. Altigen is configured for H323 with G723 codec.Can this be acheived? Do I require transcoding? Is ...
We have the following VPN Scenario:One the Gateway side, we have configured a PIX 506 firewall as a VPN server, with preshared keys. The client PC is a Windows 2000 based computer. This computer is connected to the Internet through SBC DSL connection...
Hi,We have a PIX static mappings for two blocks of IPs. The outside interface of the firewall is connected to a Cisco 2621 router. The router's Ethernet interface has the primary IP address in the same subnet as the PIX outside interface. We have als...
Hi,We have upgraded our call manager to 4 and using 1751-V router with PVDM-256 DSP for transcoding.We had configured a H.323 gateway in the callmanager and also added a transcoder (1751V router). The H323 gateway is altigen and uses G.723 codec.With...
HiI am having a 1751V gateway. I want to configure this gateway to receive calls on one voip dial peer and route it on another voip dial peer. This gives me an error message "can't gateway with peer tag".Ios version is 12.2(11)T3.Any help on this wil...
Yes, Reinstalling on the same server.MCS 7825, Compaq PROLIANT DL 320 SERVERNo, Theres is no backyp restoration required.CISCO Call Manager 3.1 (4b)After completion of installation of OS , system asked for a reboot. System robooted as a part of insta...
Hi,We have a PIX static mappings for two blocks of IPs. The outside interface of the firewall is connected to a Cisco 2621 router. The router's Ethernet interface has the primary IP address in the same subnet as the PIX outside interface. We have als...
Windows 2000 Advanced server has builtin Radius Server (Internet Authentication Server). You can configure this radius server to use the domain database for authentication.Regardsmaha
